manualshive.com logo in svg

red lion RAM-66 series, Software Manual

The Red Lion RAM-66 series is a high-performance RAM module known for its exceptional speed and reliability. Experience seamless multitasking with this powerful memory module. Find the detailed Software Manual for the RAM-66 series available for free download from our website, ensuring you make the most of your product's potential.

Share
Download
background image

 

Revised 2017-08-31

Services Tab

Drawing No. LP0997-C

RAMQTT Client

Sixnet

®

 Series SN/RAM

®

 6000 & RAM 9000 Software Manual

- 159 -

Device Root CA:

 Root Certificate Authority is required for connecting to AWS. This must be the Root 

Certificate Authority provided by AWS.

Note:

 You can also click on the file icon to browse to the certificate for use.

Advanced Settings

Port:

 Enter the port number associated with the Broker IP address or Domain Name.

The standard ports for MQTT are:

•

Unencrypted: 1883

•

Encrypted: 8883

Keep Alive (seconds):

 The Keep Alive value is the maximum time in seconds an idle connection will be 

allowed. If no data needs to be transmitted for this period, then an empty Keep Alive packet will be transmitted 
to maintain the connection as active with the server. If the Keep Alive is set to 0, it will be disabled. The 
acceptable value range is from 1 to 65535.

Caution:

Low values may generate large amounts of unnecessary data.

•

Recommended Setting: The optimal setting is unique to Cloud Service Provider.

Generic: 2 Hours (7200 seconds)

Fusion Connect: Less than 5 Minutes (285 seconds) 

Allow Incoming Messages:

 If set to Yes, RAMQTT will subscribe to topics needed to receive messages from 

the Broker. Use this option if RAMQTT should handle incoming messages.

If set to No, RAMQTT will not subscribe to any topics and will not receive any messages from the Broker. Use 
this option if RAMQTT should only publish data.

3.5.14.6

Nokia

 

IMPACT

General

IoT Cloud:

 Select the name of the Cloud Service Provider, from the drop down list, that will be receiving 

messages from this device.

•

Nokia Impact

Broker:

 Enter the Broker IP address or Domain Name provided by the Cloud Service Provider.

Encryption (TLS/SSL:

 Select whether the connection will be encrypted.

Credentials:

 This option determines whether RAMQTT will attempt to generate token credentials for this 

device or use existing token credentials.

Generate Token Credentials:

 RAMQTT will attempt to generate token credentials for this device using 

the account user name and password and the name of the group to register the token credentials to.

Using Existing Token Credentials: 

RAMQTT will use existing token credentials.

Account User Name:

 Enter the user name required to connect to the MQTT Broker.

Account Password:

 Enter the password required to connect to the MQTT Broker.

Group Name:

 Enter the name of the group this device will be registered to.

Messages

See Messages 

on page -161

Advanced Settings

Summary of Contents for RAM-66 series







































































































































































































































































































Reviews:

No comments

Related manuals for RAM-66 series

H3C RA100 Installation Manual preview
RA100
Brand: H3C Pages: 34
AT&T Nighthawk M6 Pro Let'S Get Started preview
Nighthawk M6 Pro
Brand: AT&T Pages: 2
Toto Link IP04229 User Manual preview
IP04229
Brand: Toto Link Pages: 55
CyberTAN WR214C User Manual preview
WR214C
Brand: CyberTAN Pages: 67
IBM CFFh Installation Manual preview
CFFh
Brand: IBM Pages: 34
KonNad SinoCon C2000-C2-SHK0401-BB1 User Manual preview
SinoCon C2000-C2-SHK0401-BB1
Brand: KonNad Pages: 12
Raven RFMOW V2 User Manual preview
RFMOW V2
Brand: Raven Pages: 33
CyberPower CyberPower RMCARD201 Quick Install Manual preview
CyberPower RMCARD201
Brand: CyberPower Pages: 8
RadioSPECTRAL ICOM IC-7300 Installation Manual preview
ICOM IC-7300
Brand: RadioSPECTRAL Pages: 2
Korenix JetNet 5720G-8P Series Quick Installation Manual preview
JetNet 5720G-8P Series
Brand: Korenix Pages: 52
TP-Link TL-WR703N Quick Installation Manual preview
TL-WR703N
Brand: TP-Link Pages: 17
GE ATS1203 Installation Sheet preview
ATS1203
Brand: GE Pages: 24
GE 0150-0241 ProBridge User Manual preview
0150-0241 ProBridge
Brand: GE Pages: 19
GE 40M06AAG User Manual preview
40M06AAG
Brand: GE Pages: 39
GE HC HP User Manual preview
HC HP
Brand: GE Pages: 114
GE GE-DSH-73 User Manual preview
GE-DSH-73
Brand: GE Pages: 179
GE MDS 4710M Technical Manual preview
MDS 4710M
Brand: GE Pages: 113
GE GE-DS-242-POE User Manual preview
GE-DS-242-POE
Brand: GE Pages: 210

Brands by name

Popular brands

Load more brands