manualshive.com logo in svg

red lion RAM-66 series, Software Manual

The Red Lion RAM-66 series is a high-performance RAM module known for its exceptional speed and reliability. Experience seamless multitasking with this powerful memory module. Find the detailed Software Manual for the RAM-66 series available for free download from our website, ensuring you make the most of your product's potential.

Share
Download
background image

 

Revised 2017-08-31

Advanced Tab

Drawing No. LP0997-C

Expert Mode

Sixnet

®

 Series SN/RAM

®

 6000 & RAM 9000 Software Manual

- 241 -

3.7.5

Expert

 

Mode

The Expert Mode menu allows you to edit the configuration fields of Red Lion SN

/

RAM 6000 and RAM 9000 RTU 

or router directly. This option provides the ability to perform advanced configuration capabilities for complex 
organizations.

Note:

Expert Mode is not recommended unless directed by Red Lion Technical Support.

Warning:

Should you choose to edit the configuration files directly, we encourage you to contact Red Lion 
Technical Support. Once you have manually edited a configuration file without the use of the Web 
UI, you should refrain from any further configurations to that subsystem through the Web UI, as it 
will overwrite any changes you may have made.

Configure

 

Sub

‐

Systems

The “Configure Sub-Systems” menu item allows you to edit the main configuration files of the Red Lion RTU or 
router. It is not recommended that you perform configuration activities using this facility unless instructed to do so 
by Red Lion Technical Support.

Click on the 

Configure Sub-System

 menu item and the following window appears:

Select Sub-System To Configure:

 Select a component sub-system from the list as directed by Technical 

Support. Your choice will load the given sub-system’s configuration file into the text box for editing. The 
following controls (buttons) are available:

Cancel:

 Reload the file in the text box, removing all unsaved changes.

Default: 

Load a default file in to the text box for editing. All changes to the defaults file will be reflected in 

the “real” (rather than the default) configuration file.

Save:

 Save the contents of the text box in to the “real” sub-system configuration file.

Stop:

 Stop the component sub-system service if it is currently running.

Start:

 Start the component sub-system service, or re-start it if it is currently running. Some may need a 

Stop first.

Predefined

 

Interface

The Predefined Interface Names menu item allows you to create a named interface for use in applications such as 
OpenVPN that require a logical interface, i.e. tun0 that the Red Lion does not know about. Using the Predefined 

Summary of Contents for RAM-66 series







































































































































































































































































































Reviews:

No comments

Related manuals for RAM-66 series

Paradyne 8820 Installation Manual preview
8820
Brand: Paradyne Pages: 86
D-Link Express Ethernetwork DI-704P Datasheet preview
Express Ethernetwork DI-704P
Brand: D-Link Pages: 2
Makita RF1101 Parts Breakdown preview
RF1101
Brand: Makita Pages: 2
Campbell NL115 Instruction Manual preview
NL115
Brand: Campbell Pages: 42
3Com 3C410012A - OfficeConnect Remote 531 Access... Getting Started Manual preview
3C410012A - OfficeConnect Remote 531 Access...
Brand: 3Com Pages: 72
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Brand: National Instruments Pages: 36
TP-Link ER8411 Installation Manual preview
ER8411
Brand: TP-Link Pages: 2
ICP DAS USA ZT-2024 Quick Start Manual preview
ZT-2024
Brand: ICP DAS USA Pages: 8
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Brand: Buffalo Pages: 71
Eaton SONiX Pm10 Technical Manual preview
SONiX Pm10
Brand: Eaton Pages: 14
BEC 7404 Series User Manual preview
7404 Series
Brand: BEC Pages: 159
Avaya ERS 5510 Technical Configuration Manual preview
ERS 5510
Brand: Avaya Pages: 73
Nilox 16NX071900001 User Manual preview
16NX071900001
Brand: Nilox Pages: 66
LUX LUMEN 10230 Manual preview
10230
Brand: LUX LUMEN Pages: 41
Planet FGSW-2620 User Manual preview
FGSW-2620
Brand: Planet Pages: 13
Supero AOC-USAS-H8ir User Manual preview
AOC-USAS-H8ir
Brand: Supero Pages: 54
E-Lins H820Q Series Quick Start Manual preview
H820Q Series
Brand: E-Lins Pages: 10
ADTRAN 1202880E1 Quick Start Manual preview
1202880E1
Brand: ADTRAN Pages: 4

Brands by name

Popular brands

Load more brands