manualshive.com logo in svg

red lion RAM-66 series, Software Manual

The Red Lion RAM-66 series is a high-performance RAM module known for its exceptional speed and reliability. Experience seamless multitasking with this powerful memory module. Find the detailed Software Manual for the RAM-66 series available for free download from our website, ensuring you make the most of your product's potential.

Share
Download
background image

 

Revised 2017-08-31

Automation Tab

Drawing No. LP0997-C

DNP3

Sixnet

®

 Series SN/RAM

®

 6000 & RAM 9000 Software Manual

- 197 -

Data

 

Link

 

and

 

Application

 

Layer

Use Local Station Number as This Station DNP3 Address:

 DNP3 address for the slave. This value can be 

set by the user or automatically assigned by the Add-On. If the check box Same As station Number is selected, 
then the DNP3 Address will be equal to the Station Number.

Data Link Layer

Enter Station DNP3 Address (Required):

 Enter the address for this Station if not being automatically 

assigned.

Min Response Delay (ms) (Required):

 This is the time delay in milliseconds (from 0 to 65535 msec) before 

sending the response from the slave.

Enable Self Address:

 The DNP3 Slave Driver can be configured to send its own DNP3 Address when a 

DNP3 Master asks for it. When this box is checked, if a message is sent with the Self Address (65532) in the 
destination address field, the will respond with its unique individual address. This feature simplifies the 
commissioning, troubleshooting and maintenance of devices with an unknown address. If this feature is not 
enabled, the station will ignore the messages sent to the Self Address.

Enable Data Link Confirmation:

 The DNP3 Slave Driver can be configured to retry unconfirmed data link 

primary frames. The number of retries the driver sends and the retry timeout are configurable. 

This service is disabled unless Data Link Confirmation option is set to Yes.

Data Link Retries:

 The number of Retries is configurable between 0 (Data Link Retries disabled) and 255.

Retry Timeout (ms): 

The Retry Timeout is configurable between 0 (Data Link Retries disabled) and 5000ms 

Summary of Contents for RAM-66 series







































































































































































































































































































Reviews:

No comments

Related manuals for RAM-66 series

Accelerated 6330-MX User Manual preview
6330-MX
Brand: Accelerated Pages: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Brand: Accelerated Pages: 4
Quick Eagle Networks 5842 Specification Sheet preview
5842
Brand: Quick Eagle Networks Pages: 4
Usr USR4504 Installation Manual preview
USR4504
Brand: Usr Pages: 2
IBM totalstorage 200 Hardware Installation Manual preview
totalstorage 200
Brand: IBM Pages: 152
Delta Electronics DTE-20T Instruction Sheet preview
DTE-20T
Brand: Delta Electronics Pages: 1
TRENDnet TW-100 Specifications preview
TW-100
Brand: TRENDnet Pages: 2
Weidmuller IE-SW-VL16-14TX-2SC Hardware Installation Manual preview
IE-SW-VL16-14TX-2SC
Brand: Weidmuller Pages: 17
Lancom 7100 VPN Manual preview
7100 VPN
Brand: Lancom Pages: 70
Patton electronics SMARTNODE 4950 Quick Start Manual preview
SMARTNODE 4950
Brand: Patton electronics Pages: 12
Maipu SM3100-28TC-AC Install Manual preview
SM3100-28TC-AC
Brand: Maipu Pages: 19
Paradyne JetFusion 2100 Series User Manual preview
JetFusion 2100 Series
Brand: Paradyne Pages: 296
G&D DVI-Vision-IP-Fiber Installation And Operation Manual preview
DVI-Vision-IP-Fiber
Brand: G&D Pages: 240
Comtrend Corporation WAP-5922MP Quick Install Manual preview
WAP-5922MP
Brand: Comtrend Corporation Pages: 4
Linksys PLK300 Quick Installation Manual preview
PLK300
Brand: Linksys Pages: 6
MaxComm M-150 Manual preview
M-150
Brand: MaxComm Pages: 10
l-com HA72170-NF Installation Manual preview
HA72170-NF
Brand: l-com Pages: 2
Socket Go Wi-Fi! P322 User Manual preview
Go Wi-Fi! P322
Brand: Socket Pages: 18

Brands by name

Popular brands

Load more brands