red lion RAM-66 series Software Manual Download Page 61

Page: 61 / 294

Revised 2017-08-31

Admin Tab

Drawing No. LP0997-C

Job Control

Sixnet

Series SN/RAM

6000 & RAM 9000 Software Manual

- 53 -

3.3.8

Job

Control

The Job Control feature is used to create jobs that will be run at specified intervals.
Click on the

Job Control

menu item and the following dialog window appears:

Predefined Job Settings:

Predefined Job Interval:

Select the appropriate periodic job interval from the drop-down list provided to run at

the scheduled job interval. If the option

Disabled

is selected, all the jobs created for the selected job will be

removed. The available predefined options are:

Daily:

Will run at 4:02 am.

Weekly:

Will run at 4:22 am, every Sunday.

Monthly:

Will run at 4:42 am, on the first day of every month.

Summary of Contents for RAM-66 series







































































































































































































































































































Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands

red lion RAM-66 series, Software Manual

Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands