red lion RAM-66 series Software Manual Download Page 168 | Manualshive

Page: 168 / 294

background image

Services Tab

Revised 2017-08-31

RAMQTT Client

Drawing No. LP0997-C

- 160 -

Sixnet

®

Series SN/RAM

®

6000 & RAM 9000 Software Manual

Port:

Enter the port number associated with the Broker IP address or Domain Name.

The standard ports for MQTT are:

•

Unencrypted: 1883

•

Encrypted: 8883

Keep Alive (seconds):

The Keep Alive value is the maximum time in seconds an idle connection will be

allowed. If no data needs to be transmitted for this period, then an empty Keep Alive packet will be transmitted
to maintain the connection as active with the server. If the Keep Alive is set to 0, it will be disabled. The
acceptable value range is from 1 to 65535.

Caution:

Low values may generate large amounts of unnecessary data.

•

Recommended Setting: The optimal setting is unique to Cloud Service Provider.



Generic: 2 Hours (7200 seconds)



Fusion Connect: Less than 5 Minutes (285 seconds)

Allow Incoming Messages:

If set to Yes, RAMQTT will subscribe to topics needed to receive messages from

the Broker. Use this option if RAMQTT should handle incoming messages.

If set to No, RAMQTT will not subscribe to any topics and will not receive any messages from the Broker. Use
this option if RAMQTT should only publish data.

3.5.14.7

Telenor

Cloud

Connect

General

IoT Cloud:

Select the name of the Cloud Service Provider, from the drop down list, that will be receiving

messages from this device.

•

Telenor Cloud Connect

Broker:

Enter the Broker IP address or Domain Name provided by the Cloud Service Provider.

Device Name:

Enter the device name provided by the cloud server provider.

Messages

See Messages

on page -161

Device Certificates

Device Cert:

Device Certificate is required for connecting to AWS. This can be user generated or generated

by AWS.

Device Cert Key:

Device Certificate Key is required for connecting to AWS. This can be user generated or

generated by AWS.

Device Root CA:

Root Certificate Authority is required for connecting to AWS. This must be the Root

Certificate Authority provided by AWS.

Note:

You can also click on the file icon to browse to the certificate for use.

Advanced Settings

Port:

Enter the port number associated with the Broker IP address or Domain Name.

The standard ports for MQTT are:

•

Unencrypted: 1883

•

Encrypted: 8883

«
...
166
167
168
169
170
...
»

Summary of Contents for RAM-66 series







































































































































































































































































































Reviews:

No comments

Related manuals for RAM-66 series

Module NI PXI-8250

Brand: National Instruments Pages: 39

Brand: Raritan Pages: 4

Brand: Queclink Pages: 9

Brand: XAVI Technologies Corp. Pages: 71

Brand: TFortis Pages: 86

Brand: Clavister Pages: 89

Brand: EVOC Pages: 57

Brand: Moxa Technologies Pages: 2

Brand: Z Microsystems Pages: 51

DataPlot CB1224

Brand: B-G Instruments Pages: 4

Brand: ADTRAN Pages: 20

Brand: NetCommWireless Pages: 28

Brand: Teldat Pages: 47

iConverter GX/F

Brand: Omnitron Systems Technology Pages: 2

Brand: ADTRAN Pages: 2

Brand: ADTRAN Pages: 2

Brand: ADTRAN Pages: 4

Brand: ADTRAN Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands