Services Tab
Revised 2017-08-31
SMS Handling
Drawing No. LP0997-C
- 152 -
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
Access security:
Select the Access security profile for who will be allowed access to the device. There are
three available options.
Allow any number:
Any number can access features for all user types. Login is still required.
Allow any number, Admin must be on whitelist:
Any number can access Basic/Tech functions, but only
whitelist users can access Admin functions. Login is still required.
Allow only Whitelist numbers:
Only Whitelist users can login. All users will need to login to have the
functions of their access level. Non-whitelist users’ requests will be ignored.
Login session inactivity timeout (minutes):
Set the amount of inactivity time, in minutes, the system will
keep an incoming number logged in and accepting commands before timing out and requiring a new log in.
The available range is 1 - 1440 minutes.
Respond to all login attempts:
This option determines when the device will respond to invalid login attempts.
The available options are:
Yes:
Respond to all invalid login attempts.
Ignore non-whitelist numbers:
Respond only to numbers that are on the whitelist and ignore all others.
General Passwords
Note:
The password may be alphanumeric with a minimum 4 and a maximum 20 alphanumeric
characters. The following special characters may be used
`~!@#$%^&*()_-=+[]{}\|\\:;,<.>/?
.
Admin user:
Set the password to be used by the Admin users for unlimited Read / Write access.
Tech user:
Set the password to be used by Tech users for Basic level Read Only access for IODB values and
Write permissions for Event alarm clearance only.
Basic user:
Set the password to be used by the Basic users for Read Only access.
SMS Whitelist Configuration
To control access via a whitelist by incoming number, select the Add Whitelist Number button and complete the
SMS Whitelist Settings screen to add members to the whitelist and set permission levels.
Incoming number
: Enter the incoming number (phone number without parenthesis) to allow this number to
access the SMS command handler. Incoming number must be numeric digits with or without - (hyphen)
character(s).
Note:
All - (hyphen) characters are being stripped from the phone number. The total number of digits
must be at least 4, but cannot exceed 20 digits
.
Reply-To number
: Enter the Reply-To number (phone number without parenthesis) to allow this number to
use the SMS command handler. Reply-To number must be numeric digits with or without - (hyphen)
character(s). This is useful if an international number code is required by the active cellular plan to reach this
recipient.
Note:
All - (hyphen) characters are being stripped from the phone number. The total number of digits
must be at least 4, but cannot exceed 20 digits
.
Password
: Enter the password required for the selected incoming number to access the SMS handler system.
Note:
The password may be alphanumeric with a minimum 4 and a maximum 20 alphanumeric
characters. The following special characters may be used
`~!@#$%^&*()_-=+[]{}\|\\:;,<.>/?
.
