manualshive.com logo in svg

red lion RAM-66 series, Software Manual

The Red Lion RAM-66 series is a high-performance RAM module known for its exceptional speed and reliability. Experience seamless multitasking with this powerful memory module. Find the detailed Software Manual for the RAM-66 series available for free download from our website, ensuring you make the most of your product's potential.

Share
Download
background image

 

Revised 2017-08-31

Network Tab

Drawing No. LP0997-C

Tunneling

Sixnet

®

 Series SN/RAM

®

 6000 & RAM 9000 Software Manual

- 93 -

Inbound Key:

 Specify a key for use with keyed GRE. Key is either a number or an IP address. The Inbound 

Key is used for input only. This is an optional field.

Outbound Key:

 Specify a key for use with keyed GRE. Key is either a number or an IP address. The 

Outbound Key is used for output only. This is an optional field.

Time-to-Live (Required): 

Set a fixed Time-to-Live for tunneled packets. The recommended setting for this 

field is 64. Values over 64 may cause connection failures. 

Use Multicast:

 Select Yes to enable Multicast for the tunnel.

Use ARP:

 Select Yes to enable ARP for the tunnel.

Start Tunnel at Boot:

 Select Yes to allow the interface to become active at system start.

Use DNS Lookup for RemoteIP:

 Select Yes to use DNS Lookup for the Remote IP. Every 5 minutes this will 

be resolved against the servers found in Network >DNS Settings. If the resolved IP changes, the tunnel will be 
restarted with the new Remote IP. 

Use this option to allow units with dynamic IPs to maintain a GRE tunnel. This requires the use of DynDNS, or 
other dynamic DNS updating protocols to populate the dynamic IP changes.

Click on the 

Finish 

button. You will be returned to the GRE Tunnels dialog window and the Configuration Table will 

now be populated with the recently entered data. 

To delete an existing rule, select it in the table and click on the 

Delete

 button. To edit an existing rule, select it in the 

table and click on the 

Edit 

button.

Click on the 

Save

 button for changes to be saved without activating the interface until you reboot the unit, the 

Apply 

button will save your settings and apply them immediately. To revert to the previous defaults, click on the 

Revert

 

button.

IP

 

in

 

IP

 

Tunnels

The IP in IP Tunnels menu items is used to configure a simple IP Tunnel. IP in IP Tunnel essentially encapsulates 
an IP packet into another packet with the same protocol as the transport protocol.

Click on the

 IP in IP Tunnels

 menu item and the following window appears:

Summary of Contents for RAM-66 series







































































































































































































































































































Reviews:

No comments

Related manuals for RAM-66 series

Patton electronics SMARTNODE 4900 Getting Started Manual preview
SMARTNODE 4900
Brand: Patton electronics Pages: 75
Patton electronics RocketLink-G 3088/I Getting Started Manual preview
RocketLink-G 3088/I
Brand: Patton electronics Pages: 61
Patton SmartNode 5200 Quick Start Manual preview
SmartNode 5200
Brand: Patton Pages: 12
Patton SL4020 Getting Started Manual preview
SL4020
Brand: Patton Pages: 84
Patton OnSite 3210 Series User Manual preview
OnSite 3210 Series
Brand: Patton Pages: 110
Patton electronics 4900 Series Specification Sheet preview
4900 Series
Brand: Patton electronics Pages: 2
Patton electronics SMARTNODE 4110 Series User Manual preview
SMARTNODE 4110 Series
Brand: Patton electronics Pages: 78
Patton electronics SMARTNODE 4552 Quick Start Manual preview
SMARTNODE 4552
Brand: Patton electronics Pages: 8
IBM J02M Quick Start Manual preview
J02M
Brand: IBM Pages: 32
Jetter JetWeb JX2-PR0FI1 Operator'S Manual preview
JetWeb JX2-PR0FI1
Brand: Jetter Pages: 67
RuggedCom RUGGEDSWITCH RS900G Hardware Installation Manual preview
RUGGEDSWITCH RS900G
Brand: RuggedCom Pages: 23
Accton Technology Fast SwitchHub-8mi SNMP Advanced Reference Manual preview
Fast SwitchHub-8mi SNMP
Brand: Accton Technology Pages: 13
Extron electronics PoleVault System A/V Source Inputs Specification Sheet preview
PoleVault System A/V Source Inputs
Brand: Extron electronics Pages: 4
Billion BiPAC 7301VGP User Manual preview
BiPAC 7301VGP
Brand: Billion Pages: 120
Swann NVRx-7300 series Quick Start Manual preview
NVRx-7300 series
Brand: Swann Pages: 9
Talent LT804-A Quick Installation Manual preview
LT804-A
Brand: Talent Pages: 18
Zoom 4401F Specification Sheet preview
4401F
Brand: Zoom Pages: 2
NETGEAR RBRE960B User Manual preview
RBRE960B
Brand: NETGEAR Pages: 152

Brands by name

Popular brands

Load more brands