red lion RAM-66 series Software Manual Download Page 14

Page: 14 / 294

Setup PC IP Address

Revised 2017-08-31

Accessing the Web User Interface

Drawing No. LP0997-C

- 6 -

Sixnet

Series SN/RAM

6000 & RAM 9000 Software Manual

METHOD 1: PC to: WAN /ETH0, Ethernet on SN

RAM 6000, RAM 9000

Select Use the following IP address and fill in the blank fields with the information below:

•

IP address:192.168.0.2

•

Subnet mask:255.255.255.0

•

Default gateway:192.168.0.1

•

Preferred DNS:192.168.0.1

Click OK.

The previous screen appears.

Click OK.

METHOD 2: PC to LAN: ETH1, RAM 9000 Series only

Select Use the following IP address and fill in the blank fields with the information below:

•

IP address:192.168.1.2

•

Subnet mask:255.255.255.0

•

Default gateway:192.168.1.1

•

Preferred DNS:192.168.1.1

Click OK.

The previous screen appears.

Click OK.

Verify that you are connected to the RTU or router.

Open a Command Prompt window on your laptop.

Summary of Contents for RAM-66 series







































































































































































































































































































Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands

red lion RAM-66 series, Software Manual

Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands