red lion RAM-66 series Software Manual Download Page 250

Page: 250 / 294

Advanced Tab

Revised 2017-08-31

Expert Mode

Drawing No. LP0997-C

- 242 -

Sixnet

Series SN/RAM

6000 & RAM 9000 Software Manual

Interface Name will place the name of the interface into the pull-down menus of interface selections to be used by
the system.

Click on the

Predefined Interface Names

menu item and the following dialog window appears:

Click on the

Add

button to add a named interface and the following pop-up window appears:

Enter (logical) Interface Name (Required):

Enter the name of the interface to be used for the logical

interface. For example: tun0, gre4, ppp100, etc.

Click on the

Finish

button to populate the Predefined Interface Names screen.

Click

Save

to store the settings for the next reboot. Selecting

Revert

, will reset all fields to the previously saved

defaults.

Summary of Contents for RAM-66 series







































































































































































































































































































Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands

red lion RAM-66 series, Software Manual

Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands