Services Tab
Revised 2017-08-31
Serial IP
Drawing No. LP0997-C
- 170 -
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
UDP communication. The recommended setting for this field is
<0.0.0.0>
if the additional peer IP
address option is not used.
Second/Third/Fourth/Fifth Peer IP Port:
Enter the second, third, fourth or fifth port number in the
respective fields.
Second/Third/Fourth/Fifth Client IP Port:
Enter the second, third, fourth or fifth client IP port number
into the respective fields. This is Required if the second, third, fourth or fifth is set to a specific IP, then
packets will be sent to specific IP at this client IP port number only.
TCP Client BroadCaster:
If this option is selected, the device will support 10 TCP Client broadcast socket
using Configure IP Destinations for connectivity. See
Configure IP Destinations
explanation below for a
description of available options.
TCP Client BroadCaster Traffic Activator:
If this option is selected, the device will support 10 TCP Client
broadcast socket using Configure IP Destinations for connectivity and would connect only if the serial data
is available to broadcast. See
Configure IP Destinations
explanation below for a description of available
options.
Configure IP Destinations:
Used when TCP Client BroadCaster or TCP Client BroadCaster Traffic
Activator Socket Type options are selected.
Click on
Add
button to define the required IP Destination Settings.
Enter Address 1 (Required):
This field indicates the Client
Primary IP Address that the GWLNX uses to connect to the
Host Server.
Enter Port 1 (Required):
This field indicates the Client
Primary Port Address that the GWLNX uses to connect to
the Host Server Port.
Connect Timeout 1 (Required):
This field is used to specify
the time (in seconds) to attempt a connection to this TCP
Destination, before declaring it unreachable. After the
specified time, the next destination will be attempted. The
valid range is 2 - 250 seconds. The recommended setting
for this field is 10 seconds. A value of less than 10 seconds
is not recommended for wireless environment.
Enter Address 2/3:
This is a Client First Alternative IP
address that GWLNX uses to connect to the Host Server.
