manualshive.com logo in svg

red lion RAM-66 series, Software Manual

The Red Lion RAM-66 series is a high-performance RAM module known for its exceptional speed and reliability. Experience seamless multitasking with this powerful memory module. Find the detailed Software Manual for the RAM-66 series available for free download from our website, ensuring you make the most of your product's potential.

Share
Download
background image

 

Automation Tab

Revised 2017-08-31

DNP3

Drawing No. LP0997-C

- 210 -

Sixnet

®

 Series SN/RAM

®

 6000 & RAM 9000 Software Manual

then it should be associated to a class (Class 1, Class 2 or Class 3), otherwise it should be associated to None. 
By default all DNP3 Points don't’ generate events, this feature should be modified by the user.

Object 32 - Analog Change Event:

 This field is activated on both Levels 2 and 2+. It’s used to determine if a 

DNP3 point will generate events. In case a DNP3 point generates events (Object 2 Binary Change Events) 
then it should be associated to a class (Class 1, Class 2 or Class 3), otherwise it should be associated to None. 
By default all DNP3 Points don't’ generate events, this feature should be modified by the user.

Object 33 - Frozen Change Event:

 This field is activated on both Levels 2 and 2+. It’s used to determine if a 

DNP3 point will generate events. In case a DNP3 point generates events (Object 2 Binary Change Events) 
then it should be associated to a class (Class 1, Class 2 or Class 3), otherwise it should be associated to None. 
By default all DNP3 Points don't’ generate events, this feature should be modified by the user.

Click 

Finish

 to enter your exception into the table.

To edit an entry, select the station in the table and click on the 

Edit

 button. To delete an existing entry, select the 

station in the table and click on the 

Delete

 button. 

Click on 

Store I/O Mapping

 to save your configuration before moving to the next project. Click on the 

Object 

Mapping 

button to return to the DNP3 Object Mapping Configuration dialog window.

Long

 

Outputs

 

Map

 

I/O

Configure DNP3 Points:

 If option is set to No, then no Long Outputs are mapped as DNP3 points. If set to 

Yes, the Highest Register Address field is shown to enter a Highest register Address value.

Highest Register Address (Required):

 This field is used to show or set the highest register address to map 

DNP3 points.

Click on 

Store I/O Mapping

 to save your configuration before moving to the next project. Click on the 

Object 

Mapping

 button to return to the DNP3 Object Mapping Configuration dialog window.

Binary

 

Counters

 

Map

 

I/O

 

This option provides configuration of Mapping Binary Counters I/O’s Reg/Index to DNP3 points for generating 
events based on configured DeadBand and Class Assignments when the status of any Binary Counter I/O’s 
changes. DeadBand and Class Assignments are applied to all the Reg/Index defined by Highest Register Address 
except Reg/Index entries that are defined in Exception DeadBand and Class Assignments Table.

Summary of Contents for RAM-66 series







































































































































































































































































































Reviews:

No comments

Related manuals for RAM-66 series

D-Link Express Ethernetwork DI-704P Quick Install Manual preview
Express Ethernetwork DI-704P
Brand: D-Link Pages: 17
MicroNet BroadLink SP3353 Installation Manual preview
BroadLink SP3353
Brand: MicroNet Pages: 66
Tripp Lite N201-005-BL Specification Sheet preview
N201-005-BL
Brand: Tripp Lite Pages: 3
Justec JDR454WV4 User Manual preview
JDR454WV4
Brand: Justec Pages: 61
Optostar OP-8000-EDFA-1U Series Manual preview
OP-8000-EDFA-1U Series
Brand: Optostar Pages: 9
DCB BROADCAST POLLING FRAD BPF-14 BU Manual preview
BROADCAST POLLING FRAD BPF-14 BU
Brand: DCB Pages: 28
MSNswitch UIS-322b Quick Installation Manual preview
UIS-322b
Brand: MSNswitch Pages: 2
Zhone 6388-A1-XXX Technical Specifications preview
6388-A1-XXX
Brand: Zhone Pages: 2
National Instruments NI 9229E Operating Instructions Manual preview
NI 9229E
Brand: National Instruments Pages: 26
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Brand: ivideon Pages: 11
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Brand: Paradyne Pages: 108
Weidmuller IE-SW-VL09T-6TX-3SC Hardware Installation Manual preview
IE-SW-VL09T-6TX-3SC
Brand: Weidmuller Pages: 14
LevelOne FSW-0512 Specification Sheet preview
FSW-0512
Brand: LevelOne Pages: 2
Genexis FiberTwist XGS2410 Installation Manual preview
FiberTwist XGS2410
Brand: Genexis Pages: 7
Intellinet 561044 Instructions Manual preview
561044
Brand: Intellinet Pages: 12
Positron TeleLite 720920 Series Manual preview
TeleLite 720920 Series
Brand: Positron Pages: 21
NETGEAR WNR2000v2 - Wireless- N 300 Router User Manual preview
WNR2000v2 - Wireless- N 300 Router
Brand: NETGEAR Pages: 144
IBM BladeCenter 1/10 Gb Uplink Ethernet SwitchModule Installation Manual preview
BladeCenter 1/10 Gb Uplink Ethernet SwitchModule
Brand: IBM Pages: 58

Brands by name

Popular brands

Load more brands