manualshive.com logo in svg

red lion RAM-66 series, Software Manual

The Red Lion RAM-66 series is a high-performance RAM module known for its exceptional speed and reliability. Experience seamless multitasking with this powerful memory module. Find the detailed Software Manual for the RAM-66 series available for free download from our website, ensuring you make the most of your product's potential.

Share
Download
background image

 

Revised 2017-08-31

Automation Tab

Drawing No. LP0997-C

DNP3

Sixnet

®

 Series SN/RAM

®

 6000 & RAM 9000 Software Manual

- 207 -

Object 32 - Analog Change Event: 

This field is activate by both Levels 2 and 2+. It’s used to determine if a 

DNP3 point will generates events (Object2 Binary Change Events) then it should be associated to a class 
(Class 1, Class 2 or Class 3), otherwise it should be associated to None. By default all DNP3 Points don’t 
generate events, this feature should be modified by the user.

Object 33 - Frozen Change Event:

 This field is activate by both Levels 2 and 2+. It’s used to determine if a 

DNP3 point will generates events (Object2 Binary Change Events) then it should be associated to a class 
(Class 1, Class 2 or Class 3), otherwise it should be associated to None. By default all DNP3 Points don’t 
generate events, this feature should be modified by the user.

Click 

Finish

 to enter your exception into the table.

To edit an entry, select the station in the table and click on the 

Edit

 button. To delete an existing entry, select the 

station in the table and click on the 

Delete

 button. 

Click on 

Store I/O Mapping

 to save your configuration before moving to the next project. Click on the 

Object 

Mapping

 button to return to the DNP3 Object Mapping Configuration dialog window.

Floating

 

Outputs

 

Map

 

I/O

Configure DNP3 Points:

 If No is selected, then no Analog Outputs are mapped as DNP3 points. If set to Yes, 

the Highest Register Address field is activated.

Highest Register Address (Required):

 This field is used to show or set the highest register address to map 

DNP3 points.

Click on

 Store I/O Mapping 

to save your configuration before moving to the next project. Click on the 

Object 

Mapping

 button to return to the DNP3 Object Mapping Configuration dialog window.

Long

 

Inputs

 

Map

 

I/O

 

This option provides configuration of Mapping Long Input I/O’s Reg/Index to DNP3 points for generating events 
based on configured DeadBand and Class Assignments when the status of any Long Input I/O’s changes.

Default DeadBand and Class Assignments are applied to all the Reg/Index defined by Highest Register Address 
except Reg/Index entries that are defined in Exception DeadBand and Class Assignments Table.

Summary of Contents for RAM-66 series







































































































































































































































































































Reviews:

No comments

Related manuals for RAM-66 series

Tyco Electronics 8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink Product User Manual preview
8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink
Brand: Tyco Electronics Pages: 18
Zonet ZSR4134WS User Manual preview
ZSR4134WS
Brand: Zonet Pages: 53
1&1 Homeserver+ Quick Start Manual preview
Homeserver+
Brand: 1&1 Pages: 32
Sparklan WNFB-265AXI(BT) User Manual preview
WNFB-265AXI(BT)
Brand: Sparklan Pages: 14
Kaptia Klever Getting Started preview
Klever
Brand: Kaptia Pages: 14
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Brand: Pakedge Device & Software Pages: 14
MiWire SeaWire Pro User Manual preview
SeaWire Pro
Brand: MiWire Pages: 24
Planet GSW-2416SF User Manual preview
GSW-2416SF
Brand: Planet Pages: 54
ADTRAN 239 T1 HDSL4 Installation And Maintenance Manual preview
239 T1 HDSL4
Brand: ADTRAN Pages: 20
Lanner ECA-4027 User Manual preview
ECA-4027
Brand: Lanner Pages: 99
NetCommWireless NTC-220 Series Quick Start Manual preview
NTC-220 Series
Brand: NetCommWireless Pages: 28
Patton electronics 593/25, 593/45, 593/TB, RS-422, RS-485 User Manual preview
593/25, 593/45, 593/TB, RS-422, RS-485
Brand: Patton electronics Pages: 8
Planet MGSD SERIES Quick Installation Manual preview
MGSD SERIES
Brand: Planet Pages: 16
Trane 4950 0471 Installing And Configuring preview
4950 0471
Brand: Trane Pages: 8
Datacom DM4000 Series Installation And Operation Manual preview
DM4000 Series
Brand: Datacom Pages: 118
D-Link DIR-878 User Manual preview
DIR-878
Brand: D-Link Pages: 191
Westermo MRD-455 Application Note preview
MRD-455
Brand: Westermo Pages: 13
4gon RouterBOARD 493 Quick Setup Manual And Warranty Information preview
RouterBOARD 493
Brand: 4gon Pages: 2

Brands by name

Popular brands

Load more brands