manualshive.com logo in svg

red lion RAM-66 series, Software Manual

The Red Lion RAM-66 series is a high-performance RAM module known for its exceptional speed and reliability. Experience seamless multitasking with this powerful memory module. Find the detailed Software Manual for the RAM-66 series available for free download from our website, ensuring you make the most of your product's potential.

Share
Download
background image

 

Revised 2017-08-31

Network Tab

Drawing No. LP0997-C

Firewall

Sixnet

®

 Series SN/RAM

®

 6000 & RAM 9000 Software Manual

- 77 -

To restrict access via a configured whitelist, click the check box marked Use Whitelist and then select a 
whitelist name for the list of names available in the drop-down list box provided. Whitelists may be viewed/
defined via the 

Network>Firewall>ACL Rules>Subnet Whitelist Rules

 

screen.

Note:

Setting this option to Yes does not enable the DNP3 Server, it just allows it to be accessible via the 
firewall when it is enabled. Then DNP3 Server may be enabled via the 

Automation>DNP3>Physical 

Link Layer

 

screen.

DNP3 Whitelist Name:

 Select the desired whitelist for the drop-down menu. Whitelists are created in the 

Network>Firewall>ACL Rules> Subnet Whitelist Rules

 screen.

Web UI:

 To allow external devices to connect to the Web Interface, through untrusted interfaces on this unit, 

select Yes; otherwise select No. The recommended setting for this feature is 

Yes

.

To restrict access via a configured whitelist, click the check box marked Use Whitelist and then select a 
whitelist name from the list of names available in the drop-down list box provided. Whitelists may be viewed/
defined via the 

Network>Firewall>ACL Rules>Subnet Whitelist Rules

 screen.

Note:

This setting will not override any firewall rules defined on other pages, such as service access or 
redirect rules.

Web UI Whitelist Name:

 Select the desired whitelist for the drop-down menu. Whitelists are created in the 

Network>Firewall>ACL Rules> Subnet Whitelist Rules

 screen.

Allow SNMP Agent Access:

 To allow external devices to connect to the SNMP Agent, via port 161, through 

untrusted interfaces on this unit, select Yes; otherwise select No. The recommended setting for this feature is 

Yes

.

To restrict access via a configured whitelist, click the check box marked Use Whitelist and then select a 
whitelist name from the list of names available in the drop-down list box provided. Whitelists may be viewed/
defined via the 

Network>Firewall>ACL Rules>Subnet Whitelist Rules

 screen.

Note:

Setting this option to Yes does not enable the SNMP Agent, it just allows it to be accessible via the 
firewall when it is enabled. The SNMP Agent may be enabled via the 

Services>SNMP Agent

 screen.

Note:

This setting will not override any firewall rules defined on other pages, such as service access or 
redirect rules.

SNMP Whitelist Name:

 Select the desired whitelist for the drop-down menu. Whitelists are created in the 

Network>Firewall>ACL Rules> Subnet Whitelist Rules

 screen.

IPSec/NAT/Fragmentation

Allow IPSec:

 Specify whether to allow ESP data, as well as UDP port 500 to communicate with external 

devices through untrusted interfaces. The recommended setting for this field is 

Yes

.

Note:

This is necessary if you are planning to configure any IPSec tunnels originating from this device.

Summary of Contents for RAM-66 series







































































































































































































































































































Reviews:

No comments

Related manuals for RAM-66 series

2N OfficeRoute Quick Manual preview
OfficeRoute
Brand: 2N Pages: 11
2N stargate How To Set preview
stargate
Brand: 2N Pages: 5
2N Telekomunikace EasyGate IP Brief Manual preview
EasyGate IP
Brand: 2N Telekomunikace Pages: 24
Quantum Scalar 50 Upgrade Instructions preview
Scalar 50
Brand: Quantum Pages: 20
Danfoss TFX Installation And Operation Manual preview
TFX
Brand: Danfoss Pages: 61
APM AQ-500h Specification Sheet preview
AQ-500h
Brand: APM Pages: 3
Patton electronics 3040/V35 Installation And Operation Manual preview
3040/V35
Brand: Patton electronics Pages: 23
E-Lins H900 Series Quick Start Manual preview
H900 Series
Brand: E-Lins Pages: 9
ZyXEL Communications NBG318S v2 Specifications preview
NBG318S v2
Brand: ZyXEL Communications Pages: 2
Alcatel Speed Touch 591s Technical User'S Manual preview
Speed Touch 591s
Brand: Alcatel Pages: 184
Variscite VAR-EXT-CB105 Datasheet preview
VAR-EXT-CB105
Brand: Variscite Pages: 18
UfiSpace S9700-23D Hardware Installation Manual preview
S9700-23D
Brand: UfiSpace Pages: 32
Buffalo LS520D Series Quick Setup Manual preview
LS520D Series
Brand: Buffalo Pages: 2
Xyclop XC-16CH-NVR-4TB Quick Start Manual preview
XC-16CH-NVR-4TB
Brand: Xyclop Pages: 19
Patton electronics 593/45 User Manual preview
593/45
Brand: Patton electronics Pages: 8
LevelOne WBA-4000 User Manual preview
WBA-4000
Brand: LevelOne Pages: 49
Positron TeleLite 720920 Series Manual preview
TeleLite 720920 Series
Brand: Positron Pages: 21
NetComm Wireless NTC-140-01 User Manual preview
NTC-140-01
Brand: NetComm Wireless Pages: 154

Brands by name

Popular brands

Load more brands