red lion RAM-66 series Software Manual Download Page 115

Page: 115 / 294

Revised 2017-08-31

Network Tab

Drawing No. LP0997-C

DMNR/NEMO Settings

Sixnet

Series SN/RAM

6000 & RAM 9000 Software Manual

- 107 -

2.4.7.1

DMNR/NEMO

Client

The DMNR/NEMO Client menu item is used to Specify whether to enable the DMNR/NEMO Client on this device.

Select the

DMNR/NEMO

menu item, select

yes

to enable and the following window appears:

Home Agent (HA) IP Address:

Enter the NEMO server address for the client to connect (provided by Verizon)

(Required field).

Secret Key:

N-MHAE-KEY, paired with the SPI for authentication. This field minimum length is 6 and the

maximum length is 64 and any character is supported. This must match remote server end for authentication.
(Required field) (provided by Verizon)

SPI:

N-MHAE-SPI, paired with the Secret Key for authentication. This value must match remote server end.

The valid values are 1 - 65534. (Required field).

Advanced

Settings

Clicking on the down arrow below the DMNR/NEMO Settings will display the Advanced Settings fields on the
screen. Modify the field contents as necessary.

Summary of Contents for RAM-66 series







































































































































































































































































































Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands

red lion RAM-66 series, Software Manual

Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands