red lion RAM-66 series Software Manual Download Page 162

Page: 162 / 294

Services Tab

Revised 2017-08-31

RAMQTT Client

Drawing No. LP0997-C

- 154 -

Sixnet

Series SN/RAM

6000 & RAM 9000 Software Manual

3.5.14

RAMQTT

Client

Specify whether to enable the RAMQTT client support on this device.

3.5.14.1

Amazon

AWS

™

IoT

General

IoT Cloud:

Select the name of the Cloud Service Provider, from the drop down list, that will be receiving

messages from this device.

•

Amazon AWS IoT

Broker:

Enter the Broker IP address or Domain Name provided by the Cloud Service Provider.

Messages

See Messages

on page -161

Device Certificates

Device Cert:

Device Certificate is required for connecting to AWS. This can be user generated or generated

by AWS.

Device Cert Key:

Device Certificate Key is required for connecting to AWS. This can be user generated or

generated by AWS.

Summary of Contents for RAM-66 series







































































































































































































































































































Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands

red lion RAM-66 series, Software Manual

Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands