R&S 1129.7246.03, Operating Manual

Page: 465 / 855

R&S ESU Remote Control – Description of Commands
CALCulate Subsystem
6.26 Operating Manual 1302.6163.12 - 03
CALCulate<1|2>:LIMit<1...8>:NAME <name of limit line>
This command assigns a name to a limit line. If it does not exist already, a limit line with this name is
created.
The name of the limit line may contain a maximum of 8 characters.
Up to 8 limit lines can be defined at the same time. The command is independent of the measurement
window.
Example:
"CALC:LIM1:NAME 'FM1'"
'Assigns the name 'FM1' to limit line 1.
Characteristics: *RST value: 'REM1' to 'REM8' for lines 1 to 8
SCPI: device-specific
Mode: R, A
CALCulate<1|2>:LIMit<1...8>:DELete
This command deletes the selected limit line.
Up to 8 limit lines can be defined at the same time. The command is independent of the measurement
window.
Example:
"CALC:LIM1:DEL"
'Deletes limit line 1.
Characteristics: *RST value: --
SCPI: device-specific
Mode: R, A
This command is an event and therefore has no *RST value and no query.