R&S 1129.7246.03, Operating Manual

Page: 342 / 855

Operating Manual 1302.6163.12 - 03 4.311
R&S ESU Instrument Functions
Basic Settings
The COLORS softkey gives access to the submenu where the colors for the printout
can be selected. To facilitate color selection, the selected color combination is dis-
played when the menu is entered. The previous colors are restored when the menu
is exited.
For details on selecting and configuring printers, and printing out the measurement
results refer to the Quick Start Guide chapter 1, “Preparing for Use” and chapter
“Printing Out the Measurement Results”.
Remote command:
--
COLOR ON/
OFF
The COLOR ON/OFF softkey switches over from color output to black-and-white
output. All color-highlighted areas are printed in white and all color lines in black.
This improves the contrast on the printout. The default setting is COLOR ON.
Remote command:
HCOP:DEV:COL ON
SCREEN
COLORS
The SCREEN COLORS softkey selects the current screen colors for the printout.
Remote command:
HCOP:CMAP:DEF1
OPTIMIZED
COLOR SET
The OPTIMIZED COLOR SET softkey selects an optimized color setting for the
printout to improve the visibility of the colors on the hardcopy.
Trace 1 is blue, trace 2 black, trace 3 green, and the markers are turquoise.
The other colors correspond to the display colors of the DISP – CONFIG DISPLAY –
DEFAULT COLORS 1 softkey.
Remote command:
HCOP:CMAP:DEF2
USER DEFINED The USER DEFINED softkey opens a submenu for user-defined color selection (see
submenu USER DEFINED COLORS ).
Remote command:
HCOP:CMAP:DEF3
OPTIMIZED COLOR SET
USER DEFINED
!
SELECT OBJECT
BRIGHTNESS
TINT
SATURATION
PREDEFINED COLORS
SET TO DEFAULT
The background is always printed in white and the grid in black.
The background is always printed in white and the grid in black.