R&S 1129.7246.03, Operating Manual

Page: 36 / 855

Operating Manual 1302.6163.12 - 03 4.5
R&S ESU Instrument Functions
Introduction
4.1 Introduction
All functions of the R&S ESU and their application are explained in detail in this
chapter. The sequence of the described menu groups depends on the procedure
selected for the configuration and start of a measurement:
1. Resetting the instrument
– “R&S ESU Initial Configuration – PRESET Key” on page 4.6
2. Setting the mode
– “Mode Selection – Hotkey Bar” on page 4.9
– “Return to Manual Operation – LOCAL Menu” on page 4.10
3. Setting the measurement parameters in receiver mode
– “Receiver Mode” on page 4.11
4. Setting the measurement parameters in IF analyzer mode
– “IF Spectrum Analysis Mode” on page 4.77
5. Setting the measurement parameters in APD mode
– “APD Mode” on page 4.95
6. Setting the measurement parameters in analyzer mode
– “Analyzer Mode” on page 4.102
7. Basic functions for general settings, printout and data management
– “Setup of Limit Lines and Display Lines – LINES Key” on page 4.240
– “Configuration of Screen Display – DISP Key” on page 4.252
– “Instrument Setup and Interface Configuration – SETUP Key” on page 4.260
– “Saving and Recalling Data Sets – FILE Key” on page 4.299
– “Measurement Documentation – HCOPY Key” on page 4.307
8. Additional and optional functions
– “Tracking Generator – Option R&S FSP-B9” on page 4.217
– “External Generator Control – Option R&S FSP-B10” on page 4.333
– “LAN Interface - Option R&S FSP-B16” on page 4.352
– “User Port” on page 4.372
The operating concept is described in the Quick Start Guide, chapter 4, “Basic Oper-
ation”.
The remote commands (if any) are indicated for each softkey. A detailed description
of the associated remote commands is given in chapter
“Remote Control – Descrip-
tion of Commands” .