R&S 1129.7246.03, Operating Manual

Page: 307 / 855

R&S ESU Instrument Functions
Basic Settings
4.276 Operating Manual 1302.6163.12 - 03
The table with the data of the marked set (the EDIT softkey) or an empty table in
which the following entries are preset (the NEW softkey) is displayed:
The characteristics of the set can be entered in the header field of the table, the sub-
ranges in the columns of the set.
An overwritten transducer set remains stored in the background as long as the
edited factor is stored with the
SAVE TRD SET softkey or until the table is closed. A
set overwritten by mistake can be restored by leaving the entry.
Name - Entry of name
A maximum of 8 characters is permissible for the name. The characters have to
comply with the convention of DOS file names. If the name exceeds 8 characters,
the name is truncated. The unit automatically stores all transducer sets with the
extension .TDS.
If an existing name is changed, the set stored under the previous name is retained
and will not be overwritten automatically with the new name. The previous set can
be deleted at a later time using
DELETE FACTOR/SET . Thus, sets can be copied.
Remote command:
CORR:TSET:SEL <name>
Unit - Selection of unit
The unit of the transducer set is selected from a selection box activated by the
ENTER key.
The unit should be selected prior to the entry as it determines the settable trans-
ducer factors. The preset unit for new sets is "dB".
Unit: dB
Break: OFF
Name Entry of the name
Unit Selection of unit
Break Activating the query when changing the subrange
Comment Entry of a comment
Start Entry of the start frequency of the subrange
Stop Entry of the stop frequency of the subrange
Factors Selection of the transducer factors for the subrange