R&S 1129.7246.03, Operating Manual

Page: 22 / 855

Operating Manual 1302.6163.12 - 03 0.5
R&S ESU Documentation Overview
Operating Manual
This manual is a supplement to the Quick Start Guide and is available in PDF format
on the CD-ROM delivered with the instrument. To retain the familiar structure that
applies to all operating manuals of Rohde&Schwarz Test & Measurement instru-
ments, the chapters 1 and 3 exist, but only in form of references to the correspond-
ing Quick Start Guide chapters. The operating manual has the following chapters:
Chapter 1 Front and Rear Panel
Chapter 2 Preparing for Use
Chapter 3 Firmware-Update and Installation of Firmware Options
Chapter 4 Basic Operation
Chapter 5 Basic Measurement Examples
Chapter 6 LAN Interface
Appendix A Printer Interface
Appendix B External Generator Control
Appendix C Brief Introduction to Remote Control
Chapter 1 Putting into Operation
see Quick Start Guide chapters 1 and 2.
Chapter 2 Getting Started
see Quick Start Guide chapter 5.
Chapter 3 Manual Operation
see Quick Start Guide chapter 4.
Chapter 4 Instrument Functions
forms a reference for manual operation of the R&S ESU and con-
tains a description of all instrument functions and their application.
Chapter 5 Remote Control - Basics
describes the basics for programming the R&S ESU, command pro-
cessing and the status reporting system.
Chapter 6 Remote Control - Description of Commands
lists all the remote-control commands defined for the instrument.
Chapter 7 Remote Control - Programming Examples
contains program examples for a number of typical applications of
the R&S ESU.
Chapter 8 Maintenance and Instrument Interfaces
describes preventive maintenance and the characteristics of the
instrument’s interfaces.
Chapter 9 Error Messages
gives a list of error messages that the R&S ESU may generate.
Index contains an index for the chapters 1 to 9 of the operating manual.