Omron CJ1W-NC271 - 12-2009, Operation Manual

Page: 138 / 687

110
Servo Parameter Area
Section 4-5
Interface Monitor Setting Parameters
323
(317) External Feedback
Pulse Type Selection 2 Select the external feedback pulse type.
0: 90
°
phase difference output type
1: Serial communications type (incremental encoder
specifications)
2: Serial communications type (absolute encoder
specifications)
0 - 0 to 2 R
324
(318) External Feedback
Pulse Dividing
Numerator 4 Set the external feedback pulse dividing numerator. 0 -
0 to 2
20 R
325
(319) External Feedback
Pulse Dividing
Denominator 4 Set the external feedback pulse dividing denominator. 10000 -
1 to 2
20
R
326
(31A) External Feedback
Pulse Direction
Switching 2 Reverse the direction to count the external encoder
feed back.
0: Count direction not reversed
1: Count direction reversed 0 - 0 to 1 R
327
(31B) External Feedback
Pulse Phase-Z Set-
ting 2 Set to enable or disable the Phase-Z disconnection
detection when an external encoder of 90
°
phase differ-
ence output type is used.
0: Phase-Z disconnection detection enabled
1: Phase-Z disconnection detection disabled
0 - 0 to 1 R
328
(31C) Internal/External
Feedback Pulse
Error Counter Over-
flow Level 4 Set the threshold for feedback pulse deviation errors. 16000 Com-
mand
unit
1 to 2
27 C
329
(31D) Internal/External
Feedback Pulse
Error Counter Reset 2 Clear to 0 the feedback pulse error value for each set
rotation speed. 0 Rota-
tion 0 to 100 C
Param-
eter
No.
Parameter name Param-
eter
size
Explanation Default
setting
Unit Setting
range
Data
attribute
Param-
eter
No.
Parameter name Param-
eter
size
Explanation Default
setting
Unit Setting
range
Data
attribute
400
(400) Input Signal Selec-
tion 1 4 Set the function and logic for the general-purpose
input 1 (IN1). 00949494h - 0 to
00FFFFFFh C
401
(401) Input Signal Selec-
tion 2 4 Set the function and logic for the general-purpose
input 2 (IN2). 00818181h - 0 to
00FFFFFFh C
402
(402) Input Signal Selec-
tion 3 4 Set the function and logic for the general-purpose
input 3 (IN3). 00828282h - 0 to
00FFFFFFh C
403
(403) Input Signal Selec-
tion 4 4 Set the function and logic for the general-purpose
input 4 (IN4). 00222222h - 0 to
00FFFFFFh C
404
(404) Input Signal Selec-
tion 5 4 Set the function and logic for the general-purpose
input 5 (IN5). 002B2B2Bh - 0 to
00FFFFFFh C
405
(405) Input Signal Selec-
tion 6 4 Set the function and logic for the general-purpose
input 6 (IN6). 00212121h - 0 to
00FFFFFFh C
406
(406) Input Signal Selec-
tion 7 4 Set the function and logic for the general-purpose
input 7 (IN7).
00202020h
- 0 to
00FFFFFFh C
407
(407) Input Signal Selec-
tion 8 4 Set the function and logic for the general-purpose
input 8 (IN8). 002E2E2Eh - 0 to
00FFFFFFh C
410
(40A) Output Signal Selec-
tion 1 4 Set the function assignment for the general-purpose
output 1 (OUTM1) 00030303h - 0 to
00FFFFFFh C
411
(40B) Output Signal Selec-
tion 2 4 Set the function assignment for the general-purpose
output 2 (OUTM2) 00020202h - 0 to
00FFFFFFh C