GRAUPNER mx-24s, Programming Manual

Page: 152 / 216

152
Program description: Special functions
Pupil transmitter
with DSC socket Pupil transmitter with Pupil module,
Order No. 3290.3, 3290.10, 3290.33
Trainer lead, Or-
der No.
4179.1
Trainer lead, Or-
der No.
3290.7
D 14, FM 414, FM 4014, FM 6014,
mc
-10 ...
mc
-24,
mx
-22
Teacher transmitter
with DSC socket
Teacher transmitter with Teacher
module, Order No. 3290.2, 3290.19,
3290.22
mx
-12,
mx
-16s,
mx
-24s
mc
-19 bis
mc
-24,
mx
-22,
mx
-24s
Trainer lead, Or-
der No.
4179.1
Trainer lead, Or-
der No.
3290.8
S
M
mx
-24s Teacher transmitter
mx
-24s Pupil transmitter
mx
-12,
mx
-16s,
mx
-22,
mx
-24s
and – if fi tted with the DSC socket,
Order No.
3290.24 –
mc
-19,
mc
-
22s and
mc
-24
S
M
mx
-24s Teacher transmitter with Tea-
cher / PC module, Order No. 3290.22
Trainer light-pipe
lead, Order No.
3290.4 or ECO-
lead, Order No.
3290.5
Trainer leads
(see also the Appendix, page 204)
4179.1 for Trainer mode operations with the
mx
-24s in con-
junction with any other GRAUPNER transmitter fi tted
with a DSC socket.
(identifi able by the two-pole barrel plugs at both ends)
3290.4 Light-pipe lead for transmitters with the opto-electronic
Trainer system.
(identifi able by the relatively stiff “cable” with three-
pole barrel plugs at both ends)
3290.5 ECO Trainer lead for opto-electronic Trainer system.
(identifi able by the high-fl ex co-axial cable with three-
pole barrel plugs at both ends)
3290.7 Trainer lead for connecting a Teacher transmitter with
DSC socket (e. g.
mx
-12,
mx
-16s,
mx
-24s) to a
GRAUPNER pupil transmitter with opto-electronic Pu-
pil socket
(identifi able by the “S” marking on the side of the
three-pole barrel plug)
3290.8 Trainer lead for connecting an
mx
-24s Pupil transmit-
ter to a GRAUPNER Teacher transmitter with Teacher
socket for the opto-electronic system.
(identifi able by the “M” marking on the side of the
three-pole barrel plug)
For more information regarding Trainer leads please turn to the
next page. More detailed information about the opto-electro-
nic modules for the Teacher and Pupil transmitters mentioned in
this section are included in the instructions provided with your
transmitter, and in the main
GRAUPNER FS catalogue.
General notes on Trainer mode operations
The DSC socket which is installed as standard, the optional
Teacher / PC module and the various leads make it possible to
transfer all functions or programmable single or multiple func-
tions to a suitable Pupil transmitter. When you connect the Tea-
cher transmitter to a Pupil transmitter using the Trainer lead,
note that the plug marked “M” (Master) must be connected to