GRAUPNER mx-24s, Programming Manual

Page: 10 / 216

dule for copying between two
mx
-24s transmitters
or between an
mx
-24s and a PC.
• “Info” in the » Base setup model « menu: a small
amount of supplementary information can be en-
tered at this point for each model (max. fi fteen let-
ters or symbols); this information then appears in
the revised Model Select menu.
• Logical switches: this function makes it possible to
link two switches using an “AND” or “OR” function;
the result can then be used as a virtual switch.
• Variable warning threshold for power-on “Throttle
too high” warning in the Helicopter menu.
• Fail-Safe monitor for eight servo functions; for up
to twelve servos in APCM24 mode.
• HELP button provides valuable hints on program-
ming and currently selected programming menu.
Leaf through the Help pages using the HLP button
or the rotary control.
• Convenient Timer menu: system includes eight
stopwatches, alarm timer, count-down timer, lap
counter etc., two time values and one lap time va-
lue can be displayed on-screen simultaneously in
a large typeface.
• Stopwatch with History function: the lap counter is
complemented by “Time1”, which records power-
on times, and “Time2”, which records the ON and
OFF switched times separately.
• Highlighted display of timer over-runs are more
easily picked out by the user.
• Revised CLEAR function for the timers: even if in-
dividual times are still running, CLEAR still resets
the remaining timers.
• Separate operating time recorder for each model.
• Slot time can be recorded by pressing the rota-
ry c ESC button, and then reset using the
CLR button.
• Transmitter operating hours timer is automatically
reset to zero when the battery is recharged.
• Prepared as standard for use as Pupil or Teacher
transmitter in a Trainer system.
Operational security and operating convenience
• SYNTHESIZER RF module with integral scan-
ner function exploiting dual-conversion technology:
checks frequency band for occupied channels.
• Selectable button pad lock prevents accidental
and unwanted changes during fl ight operations.
• Input lock using code number.
• Warning beep and pop-up on-screen message if
Trainer connection is incorrect.
• Variable warning threshold for battery voltage.
• Non-volatile memory for data back-up even when
the transmitter battery is discharged or removed.
• Rotary control Enter function: the software always
interprets a brief press on the rotary control as
ENTER. In the Model Select and Function Select
menus it is possible to select an item and call it up
using the rotary control alone.
• Hotkeys for contrast adjustment, servo display
(from virtually all menus), button pad lock and mo-
del select.
• The servo sequence at the receiver output can be
changed in the software.
• Model icons: graphic display of the model type
(fi xed-wing / helicopter).
• Clearly arranged character table for simplifi ed
name input procedure.
mx
-24s
10 Description of radio control system