GRAUPNER mx-24s, Programming Manual

Page: 31 / 216

31
• Quick-Select
Hold rota- Hold rota-
ry control ry control
pressed in pressed in
All codes
!
Base servo sett.
Switches
Timers
Special funct.
Memory
Transm. controls
Flight phases
Mixers
Global functions
From the multi-function list you can move to a “pro-
gram structure summary” with a long press on the
rotary control. In the interests of clarity, this sum-
mary shows the menus grouped together logically.
Continue to hold the rotary control pressed in, and
select the desired block of menus. As soon as you
release the rotary control again, the on-screen list
will include only those menus associated with the
category type.
• Slot time
The slot time can be stopped by pressing the ESC
button with the rotary control pressed in, and then
reset by pressing the
CLR button.
• Menu settings
A brief press on the rotary control or ENTER takes
you to a menu, while pressing ESC takes you
back again.
Now select a line within a menu:
BASIC SETTINGS, MODEL
Stick mode
Info
Model name
Modulation
Press and Press and
rotate rotate
Call up an input fi eld:
Brief Brief
press press
BASIC SETTINGS, MODEL
Stick mode
Info
Model name
Modulation
SEL
1
Fast access hotkeys, additional functions of the rotary control
Hotkeys for: servo display, model select, multi-function list, quick-select and slot time; using the rotary control for menu settings
• Servo Display hotkey
1 - 1 0 0 % 2 0 %
3 + 1 0 0 % 4 0 %
5 0 % 6 - 1 2 5 %
7 0 % 8 0 %
9 0 % 1 0 0 %
1 1 0 % 1 2 0 %
+
HELP
During the programming process you can move
directly to the »
Servo display « menu (see page
156) from the basic display and from virtually any
menu by pressing the
HELP button with the rotary
control pressed in.
This display shows the servo travels, taking into
account all mixer and set-up values.
Pressing the rotary control again immediately re-
turns you to your starting point.
• Model Select hotkey
+
ENTER
Graubele
02 Soarmaster 2:45h
03 DV20KATANA 5:46h still in test
04 Starlet 50 8:31h
05 free
01
06
1:25h PCM20 1675Gr
PPM18 070707
trim: new adj.
free
From the basic display you can move directly to
the »
Model select « menu (see page 59) by pres-
sing the ENTER button with the rotary control
pressed in.
• Calling up the multi-function list from the basic
display
Base setup model
Model select
Suppress codes
Servo adjustment
Control adjust
Channel 1 curve
Copy / Erase
Suppress models
Model type
Stick mode
Dual Rate / Expo
Switch display Select Select
menu menu
A brief press on the rotary control or ENTER takes
you to the multi-function list, while ESC takes you
back again.
Select the menu you wish to use by turning the ro-
tary control (or using CONTROL 5 or 6).
Transmitter buttons and rotary control
Change a value:
BASIC SETTINGS, MODEL
Stick mode
Info
Model name
Modulation
SEL
2
Rotate Rotate
Confi rm input and quit:
BASIC SETTINGS, MODEL
Stick mode
Info
Model name
Modulation
2
SEL
Brief Brief
press press
If you can see function fi elds in the bottom line in
addition to the
SEL fi eld, you can access them by
turning the rotary control.
Press ESC to return step by step to the previous
page.