GRAUPNER mx-24s, Programming Manual

Page: 61 / 216

61
Copy model model
Graubele
02 Soarmaster 2:45h
04 Starlet 50 8:31h
01
1:25h PCM20 1675Gr
PPM18 070707
trim: new adj.
Copy from Model:
03 DV20KATANA 5:46h still in test
Select the model to be copied in the “Copy from mo-
del” window, and confi rm by pressing
ENTER or the
rotary control. A further window “Copy to model” ap-
pears, where you have to enter the destination me-
mory and confi rm your choice, or interrupt the pro-
cess by pressing the
ESC button. A model memory
which is already occupied can be overwritten. In the
interests of safety you have to confi rm the copy pro-
cess once more.
Model really
03 DV20KATANA 06 free
to be copied?
NO YES
Note:
As an alternative to initialising a vacant model memo-
ry and re-programming the model data “from scratch”,
you may fi nd it preferable to use the “Copy model” op-
tion, if, for example, you wish to set up a model with
complex programming, but the same type of model -
or one which is at least similar in terms of program-
ming features is already present in the transmitter.
This procedure might well be sensible if the next step
– the unavoidable one of adjusting and checking the
copied data – appears in prospect to be less daunting
than programming a new model “from the ground up”.
Copy
mx
24 external
Select the model memory in the “Copy from model”
window, then confi rm the copy process to a PC or a
second
mx
-24s transmitter.
Model really
03 DV20KATANA
be copied to PC or other transmitter?
NO YES
The progress of the copy process is indicated by a
horizontal bar.
Copy external
mx
24
Select the destination memory in the “Copy to model”
window, and confi rm the input as already described.
Once again, you are requested to confi rm the copy
process from a PC or from another transmitter:
Model really
05
be loaded from PC or other transmitter?
NO YES
MEGA STAR
The transfer process then has to be initiated from the
second transmitter or the PC.
Note:
If no valid connection with a PC or another transmitter
exists, interrupt the copy process by switching off the
receiving transmitter, then switch it on again.
61 Program description: Model memories
Copy fl ight phase
Copy
1 Normal 2 Thermal
3
5
7 6
8
4 Speed
from phase:
Use the rotary control in the “Copy from phase” menu
to select the fl ight phase 1 … 8 (fi xed-wing models)
or 1 … 7 (model helicopters) to be copied, confi rm
your choice by pressing
ENTER or the rotary control,
then select the destination in the new window “Copy
to phase” before confi rming your choice. For safety’s
sake you will be requested to confi rm your choice
once more.
Back-up all models PC
All models to be
backed up to PC?
NO YES
This option automatically transfers all occupied model
memories in sequence to the PC for backing-up, in
contrast to the “Copy
mx
24s external” command.
Note:
If the transmitter battery is too low, the transmitter
blocks all copy and erase functions in the interests of
safety. An appropriate message then appears on the
screen.