GRAUPNER mx-24s, Programming Manual

Page: 157 / 216

157
)
ENT
1
2
3
4
(_ Desired (new) secret number :
C O D E L O C K
You can protect the multi-function menu from unau-
thorised use by entering a
four-digit code number
using the numerals 1 to 4. The security number is en-
tered using the set of buttons on the left-hand side of
the screen.
Ensure that the numbers 1 … 4 are displayed on
the left margin of the screen, then enter the numbers
in the sequence of your choice using the buttons as
follows:
ENTER = 1, ESC = 2, CLEAR = 3 and HELP
= 4:
CLR
) (1234 Desired (new) secret number :
C O D E L O C K
Memorise secret
number carefully
A brief press on the rotary control ( CLR ) erases the
numbers you have entered.
Make a careful note of the security code number;
we suggest that you write it down and store it in a
safe place. If you forget the number, you will have
to send the transmitter to the GRAUPNER Service
Centre for decoding.
When you are satisfi ed, press the ENTER or ESC
button to confi rm the four-digit security number.
The lock takes effect next time you switch the trans-
mitter off. When you switch on, the controls work wit-
hout restriction, but you will not, for example, be able
to switch models without entering the correct number
combination:
Code lock
Blocking access to the multi-function list
Please enter secret number:
1
2
3
4
***
C O D E L O C K
( _)
If you enter the code number incorrectly, you have to
wait a certain period of time before you can try again.
1
2
3
4
****
Please enter secret number:
C O D E L O C K
( )
Input error
Time lock
Erasing the code number
If you wish to erase the code number again at some
later date, call up this menu and immediately press
the rotary control twice.
The fi rst press on the rotary control erases the code
number (
CLR ). The second press generates this mes-
sage on the screen:
)
ENT
1
2
3
4
(_ Desired (new) secret number :
C O D E L O C K
Memorise secret
none
Now quit the menu by pressing the ENTER or ESC
button. The four highlighted numbers on the left of the
screen –
1 , 2 , 3 , 4 – now disappear, i. e. the side
buttons resume their original function.
Quitting the menu without entering a code num-
ber
You may have reached this menu by mistake, or out
of curiosity, in which case you will want to leave it wit-
hout pressing any buttons. In this situation the screen
looks like this:
)
ENT
1
2
3
4
(_ Desired (new) secret number :
C O D E L O C K
Press the rotary control once: the four highlighted
numbers
1 , 2 , 3 , 4 on the left of the screen now
disappear; the following message appears and the
side buttons resume their original function:
)
ENT
1
2
3
4
(_ Desired (new) secret number :
C O D E L O C K
Memorise secret
none
Now quit the menu by pressing the ENTER or ESC
button.
Tip:
If you don’t want to use the programming lock at all,
we advise you to remove this menu from the mul-
ti-function list using the »
Suppress Codes « menu,
otherwise an unauthorised person could enter a code
number and thereby prevent you using your own
transmitter.
Program description: Global functions