GRAUPNER mx-24s, Programming Manual

Page: 60 / 216

60
Copy / Erase
Model copy and fl ight phase copy function
Erase model
Copy model –>
model
Copy MX24 –> external
Copy external –> MX24
Copy flight phase
Back-up all models –>
PC
=>
=>
=>
=>
=>
=>
This menu is used for:
• erasing model memories,
• copying internally from one model memory to ano-
ther,
• copying a model memory from one
mx
-24s trans-
mitter to another,
• copying from the
mx
-24s to an industry-standard
PC,
• copying individual fl ight phases within a single mo-
del memory,
• backing up all occupied model memories in the
mx
-24s to an industry-standard PC.
To connect the transmitter to a PC you will need the
PC interface lead, Order No.
4182.9 , or the USB-PC
interface lead, Order No. 4185 , both of which are con-
nected to the Trainer / PC module, Order No. 3290.22 ,
in order to transfer model data to the PC. There the
data should be saved on a hard disc or some other
form of data medium. Later – if necessary – the data
can be loaded back into the transmitter (or another
transmitter). Full details of these procedures are in-
cluded with the leads.
To transfer data between two
mx
-24s transmit-
ters, both transmitters must be fi tted with the Trainer
/ PC module, Order No.
3290.22 . You will also need
the copy lead, Order No. 4179.2 , to make the actual
transfer.
60 Program description: Model memories
First select the desired option with the rotary control
pressed in , then call it up by pressing ENTER or the
rotary control:
Erase model
Graubele
02 Soarmaster 2:45h
03 DV20KATANA 5:46h still in test
04 Starlet 50 8:31h
01 1:25h PCM20 1675Gr
PPM18 070707
trim: new adj.
Select model to be erased:
Select the model to be erased using the rotary cont-
rol. Pressing
ESC returns you to the previous screen
page. Press ENTER or the rotary control to shift to
the next screen page:
Model really
01 Graubele
to be erased?
NO YES
Select “ NO ” or “ YES ” using the rotary control and
confi rm your choice by pressing ENTER or the rota-
ry control.
Caution:
The erasure process is irrevocable. All data in the
model memory is erased permanently!
If you wish to erase the currently active model memo-
ry in the basic display, you will immediately be asked
to defi ne the model type “Heli” or “fi xed-wing”. Howe-
ver, if you erase any of the occupied but non-active
model memories, then the message “
free ”
appears in the Model select menu.
Caution – essential information:
Be sure to connect the PC or the second transmitter to your
mx
-24s using the interface or copy
lead before you switch on the
mx
-24s transmitter(s). When the process is completed, switch the
transmitter(s) off before you disconnect the lead!
Copy lead
Order No.
4179.2
PC interface lead
Order No. 4182.9
or
USB-PC interface lead
Order No. 4185
mx
-24s
mx
-24s
mx
-24s