GRAUPNER mx-24s, Programming Manual

Page: 62 / 216

62 62 Program description: Model memories
Suppress codes
Suppressing menus from the multi-function
list
Model select Copy / Erase
Servo adjustment
Suppress models
Model type
Stick mode
Dual Rate / Expo
Base setup model
Control adjust
Channel 1 curve
Suppress : TOG
In this menu you can suppress any functions in the
multi-function list which are not required for the cur-
rently active model, or which must not be changed.
For example, if you are programming different fl ight
phases, it is advisable to suppress all global settings
such as »
Base setup model «, » Model type « etc..
The multi-function list can then be restricted to just a
few menus, and it is much easier to make sense of
the function select list. Suppressing the menus does
not disable those functions; it just means that they
can no longer be accessed directly.
Use the rotary control to select the function to be sup-
pressed, then press the rotary control briefl y to sup-
press it – or re-activate it if it is already suppressed.
Tip:
If you do not wish to block access to the multi-func-
tion list in any way, the safe method is to remove the
»
Code lock « menu from the multi-function list using
this » Suppress codes « menu.
Suppress models
Suppressing specifi c model memories
Graubele
02 Soarmaster
2:45h
03 DV20KATANA 5:46h still in test
04
Starlet 50
8:31h
05 free
01 1:25h PCM20 1675Gr
PPM18 070707
trim: new adj.
Suppress : TOG
Model memories which are seldom needed, or which
you do not wish to access for other reasons, can be
suppressed from the model select list. This also helps
to make the model select process easier.
Use the rotary control to select the model to be sup-
pressed (or included again), and reverse its status
with a brief press on the rotary control.
The “cancelled” model memories will now no longer
appear in the »
Model select « menu.