Beckman Coulter CEQ 8000, User Manual

Page: 27 / 382

Safety Information
User’s Guide 13
Chemical and Biological Safety
Normal operation of the system can involve the use of solvents and
reagents that are toxic, flammable or biologically harmful.
• Observe all precautionary information printed on the original
solution containers.
• Operate the system in the appropriate environment.
• Take all necessary precautions when using pathology or toxic
materials to prevent the generation of aerosols.
• Observe all applicable precautionary procedures when using
flammable solvents in or near the instrument.
• Wear appropriate laboratory attire, e.g., safety glasses, gloves, lab
coat and breathing apparatus, when working with hazardous
materials.
• Dispose of all waste solutions in a proper manner.
Electrical Safety
To reduce risk of electrical shock, all devices employ a three wire electrical cable and
plug to connect the equipment to earth ground.
• Ensure that the wall outlet receptacle is properly wired and earth grounded.
• DO NOT use a three-to-two wire plug adapter.
• DO NOT use a two wire extension cord or a two wire multiple-outlet power strip.
• Disconnect power to the system before performing maintenance.
• DO NOT remove any panels; panels should be removed only by qualified service
personnel.
A high voltage power supply is used with this instrument. Safety
interlocks disable high-voltage output while the capillary access
cover is open and remove the risk of shock while performing routine
instrument functions. However, removal of any panel may expose an
individual to the possibility of severe electrical shock and/or
mechanical injury. For this reason, any service requiring removal of a
panel or otherwise overriding or disabling safety interlocks must be
done by Beckman Coulter personnel only.
Moving Parts
Moving parts are limited to the sample handling system. Plate movement is safety
interlocked through the Sample Access Cover. To avoid injury due to moving parts,
observe the following:
• Keep loose clothing and hair away from the plate area.
• Never attempt to physically restrict movement of the plate assembly.
WARNING
WARNING