Beckman Coulter CEQ 8000, User Manual

Page: 189 / 382

Quality Values
User’s Guide 175
Export Options
Two tools are available in the export dialog: Apply Trimming and Export Only If
Sequence > X nt .
Apply Trimming
If the Export option was selected during sample setup or batch analysis, selecting the
Apply Trimming
option (Figure 110) will remove the trims from the sequence before
it is exported. All internal trims will be replaced by the letter “x”.
Export Only If Sequence > X nt
The resulting sequence, after trimming, may be to small to be useful. Use the
Export
Only If Sequence > X nt
option to specify a minimum size that the sequence must be
when exporting. Only those sequences greater than the set number of nucleotides will
be exported.
Editing Bases
Inserting Bases in the Analyzed Data Pane
To insert bases in the Analyzed Data pane, perform the following steps.
1. Select
Tools | Edit
from the menu.
2. Click on an area between two bases.
Figure 109:Grid Properties
Figure 110:Export Options