Beckman Coulter CEQ 8000, User Manual

Page: 145 / 382

Using Property Sets
User’s Guide 131
Using Property Sets
Property sets are groups of information (properties) that apply to a sample. To access
the Sample Property Sets, select
View | Sample Property Sets
or select a sample
cell in the Sample Plate Screen and refer to the Note Tab.
In the Property Set Table, use the Tab or arrow keys to move from cell to cell. The Tab
key moves the focus from property to value and then to the next row and the arrow
keys move in the direction selected. Pressing the Enter key moves the focus down the
table one cell at a time, within the same column. Refer to Figure 74 and Figure 75.
Figure 74: Property Set Editor
Figure 75: Sample Property Sets Dialog
To select an entire column for sorting, click on its header. The column will be
highlighted indicating the column is in selection mode.
To select a row, click on its number. As with the column selection, the appearance of
the row will be highlighted indicating the row is in selection mode.
To select consecutive rows, drag the mouse through the blocks while holding the left
mouse button. The row can be moved up or down one cell at a time by clicking the
toolbar arrow
buttons.