Beckman Coulter CEQ 8000 User Manual Download Page 326

Page: 326 / 382

Data Manager Procedures

312

CEQ™ 8000 Genetic Analysis System

4. Select the location, on the local disk, where the backup file was saved.

5. Select the file to restore and click

Restore

If a database with the same name exists, a warning will appear (Figure 176).

If this occurs, click

and either:

•Delete the database in the Data Manager (NOT recom-

mended), or

•Rename the database being restored. This is done by entering

a new name in the

Database To Restore

field.

Figure 175:Restore Database dialog

Figure 176:

Summary of Contents for CEQ 8000






























































































































































































































































































































































































Search results

Summary of Contents for CEQ 8000

Reviews:

Related manuals for CEQ 8000

Brands by name

Popular brands

Beckman Coulter CEQ 8000, User Manual

Search results

Summary of Contents for CEQ 8000

Reviews:

Related manuals for CEQ 8000

Brands by name

Popular brands