Beckman Coulter CEQ 8000 User Manual Download Page 186

Page: 186 / 382

Sequence Analysis Procedures

172

CEQ™ 8000 Genetic Analysis System

3. Select the results to be trimmed and click the right-arrow to move them to the

“selected” list box.

4. Click

5. Verify that the required Analysis Parameters are selected in the Working

Parameters dialog. (If not, click

Use Stored Parameters

and select the

appropriate Analysis Parameter).

6. Select the Export Results check-box if necessary.

•

The Edit Export Options button will become available (Figure 107). See
“Export Options” on page 175. for more information on additional options.

Figure 106:Batch Trimming Result Selection

Summary of Contents for CEQ 8000






























































































































































































































































































































































































Search results

Summary of Contents for CEQ 8000

Reviews:

Related manuals for CEQ 8000

Brands by name

Popular brands

Beckman Coulter CEQ 8000, User Manual

Search results

Summary of Contents for CEQ 8000

Reviews:

Related manuals for CEQ 8000

Brands by name

Popular brands