Beckman Coulter CEQ 8000, User Manual

Page: 206 / 382

Sequence Analysis Procedures
192 CEQ™ 8000 Genetic Analysis System
Sequence Result Report
The sequence result report includes additional information when certain Sample
Elements are selected in the Report Format dialog box. The following table describes
what each sample element includes.
Header
The header contains summary information for the sample such as sample
name, position, the method under which it was run, the sample plate name,
the analysis parameter set name, and capillary serial number. In addition,
the sample note, property set and consumables information associated with
the sample will be printed.
This is the same information found on the General,
Note, Property Set and Consumables tabs in the
Properties dialog box.
Raw Data
The raw data is the unanalyzed data from the sample run.
Result Data
The result data is data that has undergone final processing to produce result
data. If the data has been analyzed using a sequence analysis parameter set,
the data with each peak assigned a base is printed.
Result Output
The result output is the final output in text form. If the data has been
analyzed using a sequence analysis parameter set, the called sequence will
be printed in text form. This section of the report corresponds to the Base
Sequence text.
Current
Current is the trace associated with the current output of each capillary or
the total current of the sample set run.
Voltage
Voltage is the trace associated with the voltage output of the system during
the sample set run.
Analysis Log
The Analysis Log contains all of the steps used to perform the base-calling
routine on the raw data.
Run Log
The Run Log contains all of the actions performed and instrument
messages for the sample run.
Method Summary
The Method Summary contains the details of the method used to perform
the sample run.
This is the information found on the Method tab of
the Properties dialog box.