Beckman Coulter CEQ 8000, User Manual

Page: 61 / 382

Run Module
User’s Guide 47
Direct Control Toolbar
Figure 26: Run Module, Direct Control Toolbar
Table 20: Run Module, Direct Control Toolbar
View Last Analysis - Used to execute the Sequence Analysis module and display the last
sample analyzed.
Help Topics - Used to select and print specific topics in the CEQ Help file and search for
information by: topic, index entry and/or keyword.
Context-Sensitive Help - Used to open the Help file related to a specific menu option.
Inject - Used to initiate the injection of the sample prior to separation.
Separate - Used to initiate the separation of injected samples. The data generated is not
saved.
Gel Capillary Fill - Used to fill all capillaries with fresh gel. (Any gel present in the
capillary is forced out to the specified waste position in the buffer plate or wetting tray.)
Capillary Temperature - Used to change the capillary holding temperature.
Denature Samples - Used to initiate the denaturing of samples.
Optical Alignment - Used to align the lasers with the detection windows of the eight
capillaries. Data can be saved and viewed in the Sequence Analysis module.
Plate Position - Used to select the plate or tray position where the capillaries will be
immersed.
Displays the Access Plates dialog box which is used to move the plate holder to the Load
position at the front of the instrument to load or unload plates.
Release Gel Cartridge - Used to release the gel cartridge in preparation for installing a new
cartridge or preparing the system for short or long-term storage.
Install Gel Cartridge - Used to install a gel cartridge.
Release Capillary Array - Used to remove the current capillary array. To install a new
capillary array, select the
Replace capillary array
radio button. To install a manifold
plug, select Install manifold plug . To clean the capillary windows, select Clean
capillaries
.
Install Capillary Array - Used to install the capillary array. Verify or change the
information requested, and then install the array.
Replace Wetting Tray - Used to replace or re-fill the wetting tray.
Button Description