Beckman Coulter CEQ 8000, User Manual

Page: 182 / 382

Sequence Analysis Procedures
168 CEQ™ 8000 Genetic Analysis System
3. Select the Sequence-based Trimming tab.
4. Click the Perform Sequence-based Trimming check box. And make all the needed
selections discussed above.
5. Click
Save As
and save the new parameters.
6. Click
OK
.
At this point, the result can be trimmed.
1. Select the
Edit | Trim Based on Sequence
menu item.
2. The Analysis Parameters, created in the steps above, should be listed. If not, click
Use Stored Parameters
and select the appropriate Analysis Parameter.
3. Click
OK
.
When performing Quality-based and Sequence-based trimming,
Quality-based trimming is always performed first.
The resulting Base Sequence and Trace view after a Sequence-based trim has been
performed is shown in Figure 102.
Figure 102:Base Sequence and Trace Views after Sequence-based Trimming