Beckman Coulter CEQ 8000, User Manual

Page: 163 / 382

Viewing Sample Data
User’s Guide 149
Sequence Analysis Procedures
Viewing Sample Data
To view sample data, perform the following steps.
1. Select
File | Open
from the menu.
Figure 92: Open Dialog
2. In the Open dialog box, select the appropriate tab ( Sample Data , Sample
Plate Results , Sequence Results , Sequence Analysis Parameters or
Optical Scan Data ), highlight the desired item and then select OK .
3. Click on the Sample View (See “Sample View Toolbar” on page 151.) toolbar
icons to display the desired data.
Below is a description of each tab in the Open dialog box.
Sample Data: This tab displays the list of raw data and baseline data that resides in the
selected project. On the right-hand side of the list box you may view the date and time
the sample was run. You may want to open a raw data set to analyze it.