Beckman Coulter CEQ 8000, User Manual

Page: 62 / 382

48 CEQ™ 8000 Genetic Analysis System
Data Monitor Toolbar
Figure 27: Run Module, Data Monitor Toolbar
Table 21: Run Module, Data Monitor Toolbar
Unzoom - Used to undo one zoom level.
Unzoom All - Used to undo all zoom levels.
Autoscroll On/Off - Used to scale all data to the last 10 minutes of the run on the X axis and
confine the display of data to the pane on the Y axis.
Autoscale On/Off - Used to scale data to the confines of the pane. If autoscaling is disabled,
the data is scaled to its true values. Use this icon to turn autoscaling on or off.
Pause Data Update - Used to pause the display of data. Pausing data does not stop the
stream of data, just the display of data.
Monitor Baseline - Baseline monitoring displays the baseline data trace. To ensure that the
optics are working correctly and that the capillaries are clean, view the baseline when a new
capillary array is installed, after the capillaries have been filled with gel for the first time and
an optical alignment has been performed. The baseline trace should be low and relatively
flat.
If Autosave is selected from the dialog box, baseline data will be stored under the Sample
Data node (for the selected project) in the Data Manager. If Monitor Baseline is not ended
manually, baseline data will be collected until a sample plate is run or until six hours have
elapsed from the start of the baseline monitoring process.
Display Options - Invokes the Display Options dialog box used to modify display
parameters.