Beckman Coulter CEQ 8000, User Manual

Page: 53 / 382

Run Module
User’s Guide 39
When stopping a direct control process:
Stop Options - Specifies what process to stop:
Stop All
cancels all the currently running
processes.
Stop High Voltage Only
stops the high
voltage but continues to inject the sample.
Monitor
Baseline Baseline monitoring displays the baseline data trace. To
ensure that the optics are working correctly and that the
capillaries are clean, view the baseline when a new
capillary array is installed, after the capillaries have been
filled with gel for the first time and an optical alignment
has been performed. The baseline trace should be low and
relatively flat (less than 6000 counts).
If Autosave is selected from the dialog box, baseline
data will be stored under the Sample Data folder (for the
selected project) in the Data Manager. If Monitor Baseline
is not ended manually, baseline data will be collected until
a sample plate is run or until six hours have elapsed from
the start of the baseline monitoring process.
Diagnostics Used to view the instrument version, laser power, PC
Settings, monitor status, and to home the plates and/or the
gel pump.
Reset Used to re-synchronize system hardware with the
firmware and to reset the system log.
Item Description