Beckman Coulter CEQ 8000, User Manual

Page: 239 / 382

User’s Guide 225
• If the project you are looking for is not displayed, it may be located in a
different database.
• To enter a different database, all applications must be closed. See the topic
“Set Working Database” in the Online Help for more information.
3. If the data of interest was run during a particular time period, you can filter the data
by selecting the
Filter by date
check box and choosing a range of dates to be
searched.
• When enabled, the system will display only those samples that were run
during the specified time period.
4. Once you have selected a project, a list of all of the samples located in the project
will be displayed in the
Raw Data / Available
area.
5. To select the samples to be included in your Study, click to highlight the sample,
then click the right-arrow button to move the selection to the
Raw Data /
Selected
area.
6. To select all of the displayed samples to be included in your Study, click the
right-double-arrow button to move them to the
Raw Data / Selected
area.
7. To remove samples from your Study, click to highlight the sample(s) in the
Raw
Data / Selected
area and click either of the left-arrow buttons to remove them
from your selected samples.
You may select data from multiple projects to be included in your Study
as long as they are located in the same database. Multiple results from
multiple databases may not be combined into the same Study.
Continue making selections from the list of available projects and data
until all of the desired samples have been added to the Raw Data /
Selected area.
8. When you have finished making your selections, click
Next
to proceed to the
Analysis Parameters
window.
Selecting Raw Data from the Plate View tab
The
Plate View
tab allows you to make your selections from a visual display of the
sample plate (see the following figure).
Click the
Plate View
tab available in the
Select Raw Data
window.