NOTE: Programming the Upper 200 Slot to move is a custom option and is not installed on all
consoles. See the studio documentation or engineering staff for the 200 Slot
programming of each installation.
The 200 Slot input Patch Points break when a patch cord is inserted. The 200 Slot output
Patch Points split when a patch cord is inserted. The patch points for the 225L Compressor
and 235L Gate (if fitted) are shown below.
or
NOTE: The 215L patch points (Input and Output) are not shown here.
COMP IN: Compressor Input (200 Slot Input)
•
Half-normalled to COMP SIDE CHAIN IN
COMP SIDE CHAIN IN: Compressor Side-Chain Input
(200 Slot Side-chain Input)
•
Half-normalled from COMP IN
COMP OUT: Compressor Output (200 Slot Output)
•
Returns Pre or Post EQ in the programmed
audio path (Fader 1 or Fader 2)
NOTE: Patching into the COMP SIDE CHAIN IN will
replace the Compressor Input as the input to
the module’s detection path (side-chain)
GATE IN: Gate Input (200 Slot Input)
•
Half-normalled to KEY INPUT
KEY IN: Gate Key Input (200 Slot Key Input)
•
Half-normalled from GATE IN
GATE OUT: Gate Output (200 Slot Output)
•
Returns Pre or Post EQ in the programmed
audio path (Fader 1 or Fader 2)
NOTE: Patching into the KEY INPUT will replace the
Gate Input as the input to the module’s
detection path (key input)
LOWER 200 IN: Lower 200 Slot Input
•
Half-normalled to LOWER 200 SIDE CHAIN IN
LOWER 200 SIDE CHAIN IN: Lower 200 Slot Side-chain
Input
•
Half-normalled from LOWER 200 IN
LOWER 200 OUT: Lower 200 Slot Output
•
Returns Pre or Post EQ in the programmed
audio path (Fader 1 or Fader 2) (See 200 Slot
Patching below)
NOTE: Patching into the SIDE CHAIN IN will replace
the Lower 200 Input as the input to the module’s
detection path (side-chain input)