25.2
Group Enables
Groups will not function until they are “enabled.” Faders and switches must also be enabled to
be used in groups and automation.
These Enables are controlled in three (3) ways:
•
Global Functions window
•
Global Functions (Global Funcs) Menu in the ACM Main Menu
•
The “Enable Groups” button on the Vision Control Panel (VCP).
GLOBAL FUNCTIONS WINDOW
GLOBAL FUNCTIONS ACM MENU
Click the
button in Global Functions window to enable
groups on a console-wide basis.
When groups enabled, the
button will be highlighted in
yellow.
Clicking the
and
buttons will
enable faders and switches for use in groups and automation on a console-
wide basis.
When faders and switches are enabled, the
and
buttons will be highlighted in yellow.
Note: Software and hardware enable buttons can be used to “suspend”
the operation of all groups console-wide (on a global basis).
Access the ACM Main Menu by pressing the “Up” or “Down” arrow
button.
After the Main Menu opens, press the “Down” arrow three more
times to select the “Global Funcs” menu item. Press “Yes/OK.”
The Global Functions menu will open:
Using the “Up” and “Down” arrow buttons, navigate to the
function you wish to enable or disable. When the cursor is beside
the desired function, typing “Y” (Yes) will enable that function and
typing “N” (No) will disable that function.