3.10 Recallable Input Channel Switches and Auxiliary Send Routing
In addition to being controlled from the console control surface, the positions of several switches
on the 1068L Input module may be set, stored, and recalled using the recall system in the Vision
software. Input channel auxiliary routing may be set, stored, and recalled.
For full details regarding how to store and recall channel switches and routing, please refer to
section 24.0 Recall System.
3.10.1
Recallable Input Channel Switches
The positions of the following switches may be set, stored, and recalled using the recall
system:
Fader 1:
•
Solo Safe
•
Phase (polarity inverter)
•
HP Filter (High-pass filter)
•
LCR (Left, Center, Right surround panning)
•
Mic (Microphone Input)
Fader 2:
•
Solo Safe
•
Phase (polarity inverter)
•
HP Filter (High-pass filter)
•
LCR (Left, Center, Right surround panning)
•
Tape (Tape Input)
•
Follow Fader 1 (Input from Fader 1)
•
Direct (Direct Output)
Global:
•
Tape Pad
•
EQ to Fader 2
3.10.2
Recallable Auxiliary Send Routing
The following Auxiliary Send and Global routing options may be set, stored, and recalled
using the recall system:
Stereo Sends (Auxiliary Send Routing):
•
Send 1/2 -> PRE
•
Send 1/2 -> FDR 2
•
Send 3/4 -> PRE
•
Send 3/4 -> FDR 2
•
Send 5/6 -> PRE
•
Send 5/6 -> FDR 2
•
Send 7/8 -> PRE
•
Send 7/8 -> FDR 2
NOTE: Auxiliary Sends 9/10 follow the same routing set for Auxiliary Sends 7/8.
Global:
•
9/10 to Bus 1-8
3.11 Automated Channel Switches
In addition to being controlled from the console control surface, the positions of several 1068L
Input module switches may be automated using the automation system in the Vision software.
For full details regarding how to automate channel switches, please refer to section 26.0
Automation System.
The positions of the following Input module switches may be automated using the automation
system:
•
EQ BYP (EQ Bypass)
•
Fader 1 Insert
•
Fader 2 Insert
•
Fader 1 Mute
