Note: The “TC Begin,” “TC End,” “Fade in Frames,” and “Fade out Frames” entry
fields are only available when “Range of Timecodes” is selected.
The trim increment/decrement buttons are additive and may be pressed
repeatedly to increase or decrease the Trim value by the selected amount.
The Timecode Range section sets either all
Timecode addresses to be selected or a range
of addresses with user-defined beginning and
ending points. Fade in and Fade out times
can be set when Range of Timecodes is
selected. The Timecode Range section
contains the following controls:
•
All Timecodes: Selects the entire
range of Timecode locations
(00:00:00:00 to 23:59:59:XX )
•
Range of Timecodes: Selects a range
of Timecode locations (TC Begin to TC
End)
•
TC Begin: The starting Timecode
location
o
Enter the beginning Timecode
•
TC End: The last Timecode location to
which
o
Enter the ending Timecode
•
Fade in Frames: The number of
frames it takes to transition from the
previously recorded level to the Trim
level
o
Enter the fade in frames
•
Fade out Frames: The number of
frames it takes to transition from the
Trim level back to the previously
recorded level
o
Enter the fade out frames
The dB Trim section sets the amount of fader
trim. A user-defined level may be entered
directly in the dB Trim entry field or by using
the four increment/decrement buttons. The
dB Trim section contains the following
controls:
•
dB Trim: Entry field for the user-
defined trim level
•
-0.5 dB: Decrement 0.5 decibel
•
+0.5 dB: Increment 0.5 decibel
•
-5 dB: Decrement 5 decibels
•
+5 dB: Increment 5 decibels
