26.7.3
ACM Main Menu
The ACM Main Menu provides access to the setup and control functions supported by the
Automation Control Module (ACM).
26.7.3.1
PC Window Control
The navigation buttons on the Vision Control Panel (VCP) can be used to control
certain windows within the Vision PC software. This allows easy control of
commonly used software functions directly from the console.
Three (3) windows can be controlled by the VCP:
•
Mix Tree
•
Snapshots
•
Groups
The ACM functions are organized in the following
sub-menus:
•
Window: VCP control of PC software
windows
•
New Mix: Creates a new mix pass in the
ACM
•
Solo: Enables for the “Solo: Normal” and
“Solo: Groups” solo modes
•
Global Funcs (Functions): Enables for
Faders, Groups, Switches, Timecode, and
Control Surface
•
Clear Recall: Clears all recall settings on a
global basis
•
Defaults: Sets the ACM to its default
settings and burned snapshot and group
utility
•
Demo Functions: Selects one of three
moving fader demonstrations
•
Console Settings: Freewheel frames, VCP
display contrast, Timecode source, and
possible future functions
•
Code Versions: Displays ACM and FCM
firmware versions, temperature, and serial
number
To open the ACM Main Menu press either the “Up” or “Down” arrow button.
Once the menu opens, use these buttons to highlight the desired sub-menu.
Once the desired function has been highlighted, press the Yes OK button to
open that sub-menu.
