26.5.3
Automation Submodes
Automation submodes allow you to change how recording and playback is done on a
section-by-section basis. They may be applied to a section in any mode, however, some
submodes only work in certain modes. The mode continues to govern when channels
record and when they playback, the submode changes the exact nature of recording and
playback.
Submodes are indicated in channel boxes by a colored box on the right side of the channel
section:
No Submodes
Static Submode Engaged
The function of each automation submode is described below:
None: Clears the automation submodes from the selected
channel sections in the Channel Section Selection grid
Clear Sub-Mode: Clears the automation submodes for all
sections on a global basis
Static: Resets Initial Positions
•
When Timecode is stopped, the initial positions will
be replaced with the last physical positions of the
selected channel sections
•
All moves for the channel section will be erased
throughout the entire range of Timecode
•
Static can be used in Write mode only
•
Static has no effect when used in Manual, Read, or
Update modes
•
Static can be engaged at any time
•
When Static is engaged on at least one channel
section:
o
The Static button on the VCP illuminates in
red
o
Channel sections have are pink submode box
Each of the automation submodes has its own software and
hardware button:
•
None
•
Static
•
Latch
•
Touch Into Write
•
Update from Start
•
Update from Touch
•
Update to Next Move
Submodes cannot be assigned from the fader module.
