API Audio Accessories 7-22-10 Operator'S Manual Download Page 302

Page: 302 / 375

To create a new song from a mix, use the following procedure:

Highlight the desired mix and select “New Song From Mix” from the Mix Tree

Menu.

Click the “OK” button to create new song and Mix Tree with a copy of the

highlighted mix.

Important Note: When a mix pass is saved to a new song, that song and mix

must be selected in software to make it the active mix.

26.8.3.10

Export Mix

A mix can be exported and saved as a separate file and

can be later imported for use in other Songs or Projects.

To export the highlighted mix, select “Export Mix” from the

Mix Tree Menu. A “Save As” window will open.

A file name can be entered and the exported mix will be
saved in this location. A different location can be selected

using normal navigation techniques.

The mix will be saved as a file with a .vmx suffix.

Summary of Contents for 7-22-10
























































































































































































































































































































































































Search results

Summary of Contents for 7-22-10

Reviews:

API Audio Accessories 7-22-10, Operator'S Manual, Page: 302 / 375

Search results

Summary of Contents for 7-22-10

Reviews: