Stereo/Surround
Panning:
•
Stereo and Surround panning may be engaged in either path simultaneously
•
The Surround Pan-pot in both paths always feed the Surround Program Bus
•
Stereo panning may also be engaged in either or both paths
Surround Program Bus:
•
Assignments can be made to the Surround Program Bus (L, R, C, Ls, Rs)
•
An Low Frequency Effect (LFE) channel can be created using a Auxiliary Send or the Fader
2 audio path via a Multitrack Summing Bus
•
Both paths can be assigned to the Surround Program Bus simultaneously
Stereo Program Busses:
•
Assignments can be made any of the 3 Stereo Program Busses, A, B, and C
•
Both paths (Fader 1 and Fader 2) can be assigned to the all 3 Stereo Program Busses
simultaneously
•
Simultaneous assignment to both paths to all Program Busses allows the simultaneous
output of a surround and 3 stereo mixes.
Auxiliary Sends (Aux Sends):
•
Either patch can feed the 2 Stereo and 6 Mono Auxiliary Sends.
•
An Auxiliary Send can be routed pre or post the fader of the assigned path
•
Aux Sends 1-6 are mono
•
Aux Sends 7-8 and 9-10 are stereo
•
Aux Sends 9-10 can be routed to feed the Multitrack Summing Busses 1-8
2.5 Channel Components
Several sections of the console make up a complete Input/Output (I/O) Channel:
•
Channel Meter
•
Upper 200 Slot (Channel Input or Signal Processing)
o
Microphone Preamp (212L) OR
o
Direct Input (205L) OR
o
215L High-Pass Sweep Filter OR
o
225L Compressor OR
o
235L Gate
•
Lower 200 Slot (Signal Processing)
o
215L High-Pass Sweep Filter OR
o
225L Compressor OR
o
235L Gate
•
500 Equalizer Slot
o
550L 4-Band Discrete EQ OR
o
560L Graphic EQ
•
1068L Input Module
o
Input Selection for both paths
o
-6 dB Tape Pad
o
Channel Trims for both paths
o
Phase Reverse (Polarity Inverter) for both paths
o
Insert Send and Return for both paths
o
Peak Indicator for both paths
o
Fader 2
o
Filters for both paths
o
Mutes for both paths
o
Solo Controls for both path
o
Fader 1 Output to Fader 2 Input Routing
o
Stereo/Surround Panning for both paths
o
Ten Auxiliary sends (2 stereo, 6 mono)
o
Auxiliary and EQ Routing
o
Access to Output Assignments for both paths
•
Fader 1
