23.8.2 Applying an Existing Snapshot
To apply an existing snapshot to the console, perform the following procedure:
1.
Make sure any needed console settings have been stored in a snapshot before
applying a stored snapshot.
2.
Right-click the snapshot to be edited and select “Apply Snapshot” from the menu.
The “Apply Snapshot” window will open.
3.
Select one or more channels using the Channels To Apply selection grid or click the
“All Available” button to select all the available channels.
4.
Select the channel sections to include in the snapshot using the checkboxes in the
“Sections to Save” section.
5.
Click the “Apply” button to apply the snapshot data to the console.
6.
The “Apply Snapshot” window will close and the selected snapshot settings will be
applied to the console.
23.8.3 Editing a Snapshot Name
To change the name of a snapshot, perform the following procedure:
1.
Right-click the desired snapshot and select “Edit Name” from the menu. A text
entry field will open in the snapshot name.
2.
Enter a new name or edit the existing one.
3.
Click outside the text entry field or press the “Enter” key on the PC keyboard to
accept the new name.
4.
The selected snapshot will be renamed.
23.8.4
Deleting
Snapshots
To delete one or more snapshots, perform the following procedure:
1.
Highlight the snapshot(s) to be deleted.
2.
Right-click the highlighted snapshot(s)and select “Delete Snapshot” from the menu.
3.
The selected snapshot(s) will be deleted.
Note: When “Delete Snapshot” is selected, the snapshot will be deleted with no
further warning. There is no prompt to confirm the deletion and no “undo” to
restore the deleted snapshot. Caution should be used when deleting
snapshots.
23.8.5
Exporting
a
Snapshot
To export a snapshot, perform the following procedure:
1.
Right-click the snapshot to be exported and select “Export Snapshot” from the
menu.
2.
The selected snapshot will be export to a file.
3.
Exported snapshot files can be imported to other projects via the File Menu.
