8.2.2 227M Cue Master Module
The two Stereo Auxiliary Sends (7/8 and 9/10) are designed to be used as Cue Sends for
headphone feeds while recording and as Effects Sends while mixing.
The 227M CUE MASTER module facilitates the routing of the outputs of the Grand Master
and Lt Rt Fold Down Matrix to the Stereo Auxiliary Sends (7/8 and 9/10).
The 227M also contains the preamps for the two (2) Talk Back microphones:
•
Talk Back Mic (Internal): A mic is mounted in the Meter Bridge for Control Room
Talk Back
•
Reverse Talk Back (External): An input for an external microphone is provided for
Studio Talk Back
NOTE: Refer to the 12.0 Talk Back section later in this manual for detailed Talk Back
information.
The 227M controls function as follows:
CAL (Calibration): Output calibration trim-pot for the Aux Send
The following sources may be added to the 7/8 and
9/10 Aux Busses:
•
Grand Master output
•
Lt Rt Fold Down Matrix output
This is used primarily to send the selected Program
mix(es) to the headphones while recording. Sends
from individual channels may be added to the
Program mix(es). This can be very handy for
creating quick cue mixes with ability to reinforce
certain tracks as needed.
LEVEL: Stereo Master level control
•
Feeds the 227L SEND OUT patch points
•
A green LED indicator illuminates when engaged
GM TO CUE 7/8: Adds the stereo Grand Master output to Aux Busses 7 and
8
•
A yellow LED indicator illuminates when engaged
GM TO CUE 9/10: Adds the output of the Stereo Grand Master to Aux Busses
9 and 10
•
A yellow LED indicator illuminates when engaged
Lt Rt TO CUE 7/8: Adds the output of the Lt Rt Fold Down Matrix to Aux
Busses 7 and 8
•
A yellow LED indicator illuminates when engaged
Lt Rt TO CUE 9/10: Adds the output of the Lt Rt Fold Down Matrix to Aux
Busses 9 and 10
•
A yellow LED indicator illuminates when engaged
